Mundorf
€8.55 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.56mH ±2%, 0.64ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,56
BL71-0,56
|
Mundorf
€8.12 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.47mH ±2%, 0.58ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,47
BL71-0,47
|
Mundorf
€7.70 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.39mH ±2%, 0.52ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,39
BL71-0,39
|
Mundorf
€7.26 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.33mH ±2%, 0.47ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,33
BL71-0,33
|
Mundorf
€6.83 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.27mH ±2%, 0.42ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,27
BL71-0,27
|
Mundorf
€6.07 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.15mH ±2%, 0.31ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,15
BL71-0,15
|
Beyma
€535.76 IT/piece |
![]() |
10MCF400Nd 8 ohm
Closed speaker Beyma 10MCF400Nd, 8 ohm, 10 inch
Mid frequency transducer with a 4" edgewound aluminium voice coil and a carbon fiber cone for optimum loading behaviour and low distortion.
110MCF40ND8
110MCF40ND8
|
Mundorf
€28.10 IT/piece |
![]() |
Mundorf BL100 air core coil, 3.3mH ±2%, 1ohm, 1.00mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-3,30
BL100-3,30
|