Mundorf
€17.03 IT/piece |
Mundorf BH125 ferrite core coil, 1mH ±3%, 0.11ohm, 1.25mm OFC-copper wire, Ø35xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-1,0
BH125-1,0
|
Mundorf
€13.03 IT/piece |
Mundorf BH100 ferrite core coil, 1mH ±3%, 0.13ohm, 1.00mm OFC-copper wire, Ø30xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-1,0
BH100-1,0
|
Beyma
€76.71 IT/piece |
CD14Fe, CD14Nd 8 ohm
Diaphragm for Beyma CD14Fe and CD14Nd, 8 ohm
5MCD148
5MCD148
|
BMS
€93.79 IT/piece |
12N620, 12C262, 12C362, 12CN680 4 ohm
Recone kit for BMS 12N620 and cone section of 12C262, 12C362 and 12CN860, 4 ohm, glue not included
BMS-D12N620-4
BMS-D12N620-4
|
BMS
€93.79 IT/piece |
12N620, 12C262, 12C362, 12CN680 8 ohm
Recone kit for BMS 12N620 and cone section of 12C262, 12C362 and 12CN860, 8 ohm, glue not included
BMS-D12N620-8
BMS-D12N620-8
|
AB Sound
€0.91 IT/piece |
BANANE
Red PVC banana plug, stackable, lenght 43 mm, solder contact
Une fiche banane 4 mm empilable rouge PVC, longueur 43 mm, 36A / 60VCC. |
Mundorf
Unavailable |
MCap630 5.6 µF
MCap (MKP) 630V Mundorf capacitor 5.6 µF
The MCap® Classic series has been the entry-level Mundorf audio film capacitor since 1990. By avoiding an additional housing, the simple printing method and classic longitudinal structure create a compact and economical MKP capacitor. The dielectric is in aluminum metallized polypropylene.
MCAP630 5,6
MCAP630 5,6
|
Mundorf
€51.16 IT/piece |
Mundorf BL71 air core coil, 22mH ±2%, 5.26ohm, 0.71mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |