Dome tweeter Peerless H25TG05-08, 8 ohm, 1-inch voice coil, front place 103.8 mm diameter
|
Peerless |
H25TG05-08 |
Dome tweeter |
|
|
Brand Peerless |
TLHP code H25TG05-08 |
|
|
Product type Dome tweeter |
|
|
Unavailable
-
This H family tweeter features an 1Inch 8Ohm voice coil, a treated silk dome, large rear chamber for low resonant frequency, and a ferrofluid-cooled motor. The large motor and rear chamber allow for robust power handling capacity. The tweeter comes with a faceplate with recessed mounting holes, for easy installation into the desired application. The faceplate has a horn geometry for increased sensitivity.
General |
|
| Product type | Dome tweeter |
| Brand | Peerless |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 4 inch |
| Manufacturer sensitivity | 98 dB |
| Nominal power handling | 150 W |
Fundamental parameters |
|
| Sd | 5.2 cm² |
| Mms | 0.4 gr |
| Cms | 22.9 µm/N |
| Le | 0.02 mH |
| Re | 6.66 ohm |
| BL | 2.93 T.m |
Small signal parameters |
|
| Fs | 1750.51 Hz |
| Qes | 3.08 |
| Qms | 3.57 |
| Qts | 1.65 |
Datas |
|
| Xmax | ±1 mm |
| EBP | 568 Hz |
| Zmin | 7.96 ohm |
| Fs / Qts | 1 Hz |
| Weight | ~0.6 kg |
Dimensions |
|
| Voice coil diameter | 1 inch |
| Gap height | 3 mm |
| Outside diameter | 103.6 mm |
| Baffle cutout diameter | 85.4 mm |
| Front thickness | 4 mm |
| Depth after front | 55.2 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Dome material | Cloth |
Question about Peerless H25TG05-08
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
With Peerless H25TG05-08, customers has also bought
Informations Peerless H25TG05-08
This H family tweeter features an 1Inch 8Ohm voice coil, a treated silk dome, large rear chamber for low resonant frequency, and a ferrofluid-cooled motor. The large motor and rear chamber allow for robust power handling capacity. The tweeter comes with a faceplate with recessed mounting holes, for easy installation into the desired application. The faceplate has a horn geometry for increased sensitivity.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Peerless H25TG05-08
SPL vs Impedance measure
Dimensions
