Coins en alliages

Set of 8 black steel speaker corner, 40 x 40 mm, 2 legs, with wrapover, to be fixed with truss head screws

Ideal for protecting the corners of an enclosure with a recessed front. Requires the outer edges of the enclosure to be rounded to be installed. Fixing on 2 points with domed head screw, for example VI-35X16-BCC-X24.

Large ball corner 64x64 mm, zinc, 3 paws, for profil 35 mm

Heavy duty ball corner cranked to suit 35 mm angle or casemaker. 3 leg - 1,5 mm Steel, zinc plated. Fixing holes: 5,1 mm. (also available in 2 mm steel - CB-31042-3Z) Weight: 100g

Large ball corner corner bead 79mm, zinc, 2 paws, for profil 79 mm

Combined ball corner and brace 79mm high, for 80mm basemaker cranked to suit 30mm angle or casemaker – 1.5mm Steel, zinc plated. Fixing holes ø 5,1mm

Ball corner 50mm, zinc, 3 paws

Medium ball corner - 3 short legs 1,5 mm Steel, zinc plated Fixing holes: 5,1 mm

Ball corner 42.5mm, zinc, 3 paws, corner bead et for profil 30 mm

Combined ball corner and brace with stacking dimple cranked to suit 45mm lidmaker. (This corner is 2.5mm higher than the standard CB-3126-3Z) 1.5mm Steel zinc plated. Fixing holes 5.1mm.

Large ball corner 64mm, zinc, 3 paws

Heavy Duty Ball Corner like CB-6101-3Z (1,5 mm Steel) but in 2 mm Steel, zinc plated. Fixing holes: 5.1 mm

Large ball corner corner bead 75mm, zinc, 2 paws, for profil 80 mm

Combined ball corner and brace to suit 80 mm lidmakers -1,5 mm Steel, zinc plated. Fixing holes: 5,1 mm . Weight: 94g

Ball corner 50mm, zinc, 3 paws, corner bead and for profil 45 mm

Medium combined corner and brace to suit 45 mm lidmakers, cranked 1,2 mm Steel, zinc plated Fixing holes: 5,1 mm