Speaker 18 Sound 12NDA520, 8 ohm, 12 inch

Brand 
Eighteen Sound
Model 
12NDA520
SKU 
12NDA520-8
Manufacturer code 
ALT120520WF08NA
Product type 
Cone driver
Brand
Eighteen Sound
Model
12NDA520
TLHP code
12NDA520-8
Manufacturer code
ALT120520WF08NA
Product type 
Cone driver

Unavailable

  • The 12NDA520 is a 12" mid-low transducer created for compact reflex 2-way enclosures and designed to be coupled with typical 1" and 1.4" compression drivers. It can also be used in mid-low applications on modern line-array systems.

    Its features and design characteristics make it extremely defined in mid-range frequencies and offer a significant and consistent bottom-end, making the product also suitable for monitoring applications. The 12NDA520 incorporates our proprietary Active Impedance Control technology (AIC), consisting of an additional coil fixed on the pole piece and connected in parallel to the moving coil. The magnetic field generated by this coil has the following effects:
    1) Impedance linearization
    2) Acoustic and electric phase linearization
    3) Significant increase of sensitivity and total SPL
    4) Total harmonic distortion reduction
    5) Constant power transfer

    By not absorbing the moving coil's electromagnetic energy, AIC offers substantial advantages relating to the quality of sound.
    The neodymium magnet assembly developed by Eighteen Sound engineers assures high flux concentration, low power compression and excellent heat exchange since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology. This results in high levels of force factor and power handling with an optimum power to weight ratio.
    The curvilinear cone, created from a high damping wood pulp, has been designed to achieve the best possible linearity within its intended frequency range.
    The 12NDA520 employs our Interleaved Sandwich Voice coil (ISV) technology in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The final result is an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
    A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 12NDA520 far more resistant to the corrosive effects of salts and oxidization.

    100,5 dB SPL 1W / 1m average sensitivity
    65 mm (2,52 in) Interleaved Sandwich Voice coil (ISV)
    300 W AES power handling
    Neodymium magnet assembly
    AIC (Active Impedance Control) secondary voice coil for superior intelligibility, very low distortion and inductance linearization
    Suitable for two way high quality applications

General

Product type Cone driver
Brand Eighteen Sound
Reference 12NDA520
Product code ALT120520WF08NA

Informations

Nominal impedance 8 ohm
Dimensional category 24 inch
Frequency coverage type Low
Manufacturer sensitivity 100.5 dB
Calculated sensitivity 98.8 dB
Nominal power handling 300 W
Max power handling 450 W
Bandwidth 55÷6000 Hz

Fundamental parameters

Sd 531 cm²
Mms 36 gr
Cms 285 µm/N
Le 0.03 mH
Re 5.2 ohm
BL 14.4 T.m

Small signal parameters

Fs 50 Hz
Qes 0.28
Qms 5.5
Qts 0.27
Vas 111 L

Datas

Xmax ±4 mm
EBP 179 Hz
Zmin 6.5 ohm
Fs / Qts 185 Hz
Vas * Qts² 8.1 L
Calculated efficiency 4.76 %
Weight ~2.2 kg

Dimensions

Voice coil diameter 2.5 inch
Outside diameter 3154 mm
Baffle cutout diameter 282 mm
Depth 125 mm
Front thickness 11 mm
Depth after front 114 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium


Question about Eighteen Sound 12NDA520-8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations Eighteen Sound 12NDA520-8

The 12NDA520 is a 12" mid-low transducer created for compact reflex 2-way enclosures and designed to be coupled with typical 1" and 1.4" compression drivers. It can also be used in mid-low applications on modern line-array systems.

Its features and design characteristics make it extremely defined in mid-range frequencies and offer a significant and consistent bottom-end, making the product also suitable for monitoring applications. The 12NDA520 incorporates our proprietary Active Impedance Control technology (AIC), consisting of an additional coil fixed on the pole piece and connected in parallel to the moving coil. The magnetic field generated by this coil has the following effects:
1) Impedance linearization
2) Acoustic and electric phase linearization
3) Significant increase of sensitivity and total SPL
4) Total harmonic distortion reduction
5) Constant power transfer

By not absorbing the moving coil's electromagnetic energy, AIC offers substantial advantages relating to the quality of sound.
The neodymium magnet assembly developed by Eighteen Sound engineers assures high flux concentration, low power compression and excellent heat exchange since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology. This results in high levels of force factor and power handling with an optimum power to weight ratio.
The curvilinear cone, created from a high damping wood pulp, has been designed to achieve the best possible linearity within its intended frequency range.
The 12NDA520 employs our Interleaved Sandwich Voice coil (ISV) technology in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The final result is an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 12NDA520 far more resistant to the corrosive effects of salts and oxidization.

100,5 dB SPL 1W / 1m average sensitivity
65 mm (2,52 in) Interleaved Sandwich Voice coil (ISV)
300 W AES power handling
Neodymium magnet assembly
AIC (Active Impedance Control) secondary voice coil for superior intelligibility, very low distortion and inductance linearization
Suitable for two way high quality applications

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes Eighteen Sound 12NDA520-8

SPL measure *

Image spl measure cone driver Eighteen Sound Speaker 18 Sound 12NDA520, 8 ohm, 12 inch

* Frequency response curve of 12NDA520 made on 50 lit. enclosure tuned 60hz infree field (4π) environment. Enclosure closes the rear of the driver. The thin line represents 45 deg. off axis frequency response.


Impedance measure *

Image impedance measure cone driver Eighteen Sound Speaker 18 Sound 12NDA520, 8 ohm, 12 inch

* Free air impedance magnitude curve.


Dimensions

Image Drawing & Mounting (1/2) cone driver Eighteen Sound Speaker 18 Sound 12NDA520, 8 ohm, 12 inch
Image Drawing & Mounting (2/2) cone driver Eighteen Sound Speaker 18 Sound 12NDA520, 8 ohm, 12 inch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x