Speaker 18 Sound 18W1000, 8 ohm, 18 inch

Brand 
Eighteen Sound
Model 
18W1000
SKU 
18W1000-8
Manufacturer code 
221884150
Product type 
Cone driver
Brand
Eighteen Sound
Model
18W1000
TLHP code
18W1000-8
Manufacturer code
221884150
Product type 
Cone driver

Unavailable

  • The 18W1000 is a low frequency woofer which sets a benchmark in 18" (460 mm) high output transducers. It represents a further development of the Eighteen Sound 18LW1250 but has a lighter mass and increased sensitivity.

    The 18W1000 can be used as a low bass or sub-woofer component, in either a reflex, bandpass or horn loaded configuration, in high power fixed or touring loudspeaker systems. It provides clean, linear, undistorted low frequency reproduction at very high power levels. The high excursion capabilities of the surround and suspension system, in conjunction with the Double Silicon Spider (DSS), enables the 18W1000 to achieve high levels of linear travel while maintaining full control of the moving mass. The high quality curvilinear cone assures smooth response and exceptional strength with maximum reliability under high mechanical stress.
    The 100mm copper wire voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a balanced coil with a uniform distribution of mass and motive energy.
    This results in an extremely linear motor assembly. Excellent heat dissipation has been achieved by incorporating air channels between the basket and magnetic top plate. Maximum flux concentration and force factor in the gap is assured by the unique shape and design of the top and back plates, which have been researched and designed using our in-house magnetic flux FEA CAD resource.
    Due to the increasing use of audio systems at outdoor events, the ability of the 18W1000 to perform in adverse weather conditions or in areas of high humidity is a key feature. This has been achieved using an exclusive cone treatment and magnetic plate processes which resist corrosion and render the cone water repellent.

    99 dB SPL 1W / 1m average sensitivity
    100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
    1000 W AES power handling
    Double Silicon Spider (DSS) for improved excursion control and linearity
    Weather protected cone and plates for outdoor usage
    Improved heat dissipation via unique basket design
    Suitable for high SPL subwoofer designs

General

Product type Cone driver
Brand Eighteen Sound
Reference 18W1000
Product code 221884150

Informations

Nominal impedance 8 ohm

Datas

Weight ~14.6 kg


Question about Eighteen Sound 18W1000-8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.



Eighteen Sound 18W1000-8, Range, version, replacement...


Repair Eighteen Sound 18W1000-8


Informations Eighteen Sound 18W1000-8

The 18W1000 is a low frequency woofer which sets a benchmark in 18" (460 mm) high output transducers. It represents a further development of the Eighteen Sound 18LW1250 but has a lighter mass and increased sensitivity.

The 18W1000 can be used as a low bass or sub-woofer component, in either a reflex, bandpass or horn loaded configuration, in high power fixed or touring loudspeaker systems. It provides clean, linear, undistorted low frequency reproduction at very high power levels. The high excursion capabilities of the surround and suspension system, in conjunction with the Double Silicon Spider (DSS), enables the 18W1000 to achieve high levels of linear travel while maintaining full control of the moving mass. The high quality curvilinear cone assures smooth response and exceptional strength with maximum reliability under high mechanical stress.
The 100mm copper wire voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a balanced coil with a uniform distribution of mass and motive energy.
This results in an extremely linear motor assembly. Excellent heat dissipation has been achieved by incorporating air channels between the basket and magnetic top plate. Maximum flux concentration and force factor in the gap is assured by the unique shape and design of the top and back plates, which have been researched and designed using our in-house magnetic flux FEA CAD resource.
Due to the increasing use of audio systems at outdoor events, the ability of the 18W1000 to perform in adverse weather conditions or in areas of high humidity is a key feature. This has been achieved using an exclusive cone treatment and magnetic plate processes which resist corrosion and render the cone water repellent.

99 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
1000 W AES power handling
Double Silicon Spider (DSS) for improved excursion control and linearity
Weather protected cone and plates for outdoor usage
Improved heat dissipation via unique basket design
Suitable for high SPL subwoofer designs

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes Eighteen Sound 18W1000-8

SPL measure *

Image spl measure cone driver Eighteen Sound Speaker 18 Sound 18W1000, 8 ohm, 18 inch

* Frequency response curve of 18W1000 made on 180 lit. enclosure tuned 35hz in free field (4π) environment. Enclosure closes the rear of the driver. The thin line represents 45 deg. off axis frequency response


Impedance measure *

Image impedance measure cone driver Eighteen Sound Speaker 18 Sound 18W1000, 8 ohm, 18 inch

* Free air impedance magnitude curve.


Dimensions

Image Drawing & Mounting (1/2) cone driver Eighteen Sound Speaker 18 Sound 18W1000, 8 ohm, 18 inch
Image Drawing & Mounting (2/2) cone driver Eighteen Sound Speaker 18 Sound 18W1000, 8 ohm, 18 inch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x