Coaxial speaker B&C 10NCX , 8+8 ohm, 10 inch

Brand 
B&C Speakers
Model 
10NCX
SKU 
10NCX-8+8
Manufacturer code 
ALT10NCX8
Product type 
Coaxial driver with two entries
Brand
B&C Speakers
Model
10NCX
TLHP code
10NCX-8+8
Manufacturer code
ALT10NCX8
Product type 
Coaxial driver with two entries

Unavailable

  • 400 W continuous program power capacity
    70° nominal coverage
    60 – 18000 Hz response
    94 dB sensitivity
    Single Neodymium magnet assembly
    XO-5 dedicated crossover network

General

Product type Coaxial driver with two entries
Brand B&C Speakers
Reference 10NCX
Product code ALT10NCX8

Informations

Nominal impedance 8+8 ohm
Dimensional category 10.5 inch
Manufacturer sensitivity 94 | 106 dB
Calculated sensitivity 95.1 dB
Nominal power handling 200 | 50 W
Bandwidth 60÷18000 Hz
Recommended min cutoff frequency 1200 Hz

Fundamental parameters

Sd 320 cm²
Mms 28 gr
Le 1.2 mH
Re 5.6 ohm
BL 12.7 T.m

Small signal parameters

Fs 57 Hz
Qes 0.35
Qms 3.7
Qts 0.32
Vas 40 L

Datas

Xmax ±3 mm
EBP 163 Hz
Zmin 6.8 ohm
Zmin N°2 7.3 ohm
Fs / Qts 178 Hz
Vas * Qts² 4.1 L
Efficiency 2 %
Calculated efficiency 2.04 %
Weight ~4.6 kg
Dispersion 70° x 70°
Horn technology Speaker cone

Dimensions

Voice coil diameter 2.5 | 2.5 inch
Outside diameter 262 mm
Baffle cutout diameter 230 mm
Front thickness 14 mm
Depth after front 130 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite
Basket masterial Aluminium
Winding material Aluminium
Winding material Aluminium
Diaphragm material Titanium


Question about B&C Speakers 10NCX-8+8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations B&C Speakers 10NCX-8+8

400 W continuous program power capacity
70° nominal coverage
60 – 18000 Hz response
94 dB sensitivity
Single Neodymium magnet assembly
XO-5 dedicated crossover network

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x