Speaker Monacor SP-38A/500BS, 8 ohm, 15 inch
|
Monacor |
SP-38A/500BS |
SP-38A/500BS-8 |
Cone driver |
|
|
Brand Monacor |
Model SP-38A/500BS |
TLHP code SP-38A/500BS-8 |
|
|
Product type Cone driver |
|
||
-
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.
This series of coils is particularly suitable for subwoofer filtering when looking for a good size / inductance ratio, a low DRC and an affordable price. The BS series, completely redesigned in 2010, replaced the famous Mundorf i and Bi series.
Regarding the manufacturing process, once the coil is wound, it is heated by means of an electric pulse melting the layer of varnish. When cooling, the individual windings are firmly bound together by the baked varnish and are thus prevented from vibrating and the original signal remains intact.
General |
|
| Product type | Cone driver |
| Brand | Monacor |
| Reference | SP-38A/500BS |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 15 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 97 dB |
| Calculated sensitivity | 95.35 dB |
| Nominal power handling | 500 W |
| Max power handling | 1500 W |
| Bandwidth | 37÷3500 Hz |
Fundamental parameters |
|
| Sd | 855 cm² |
| Mms | 107 gr |
| Cms | 160 µm/N |
| Le | 1.6 mH |
| Re | 6 ohm |
| BL | 18.25 T.m |
Small signal parameters |
|
| Fs | 37 Hz |
| Qes | 0.38 |
| Qms | 4.37 |
| Qts | 0.35 |
| Vas | 168 L |
Datas |
|
| Xmax | ±6 mm |
| EBP | 97 Hz |
| Fs / Qts | 106 Hz |
| Vas * Qts² | 20.58 L |
| Calculated efficiency | 2.15 % |
| Weight | ~11.4 kg |
Dimensions |
|
| Voice coil diameter | 4 inch |
| Outside diameter | 385 mm |
| Baffle cutout diameter | 355 mm |
| Depth | 160 mm |
| Front thickness | 14 mm |
| Depth after front | 146 mm |
| Diamètre aimant (mm) | 222 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Voice coil former | Kapton |
| Surround shape | Triple roll |
| Surround material | Cloth |
| Dome material | Paper |
Question about Monacor SP-38A/500BS-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Monacor SP-38A/500BS-8, Range, version, replacement...
Informations Monacor SP-38A/500BS-8
This series of coils is particularly suitable for subwoofer filtering when looking for a good size / inductance ratio, a low DRC and an affordable price. The BS series, completely redesigned in 2010, replaced the famous Mundorf i and Bi series.
Regarding the manufacturing process, once the coil is wound, it is heated by means of an electric pulse melting the layer of varnish. When cooling, the individual windings are firmly bound together by the baked varnish and are thus prevented from vibrating and the original signal remains intact.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Monacor SP-38A/500BS-8
SPL vs Impedance measure
Dimensions
