Oberton |
15NXB700 |
15NXB700-8 |
11115N0208 KTL Magnet + system Silver frame |
Cone driver |
|
Brand Oberton |
Model 15NXB700 |
TLHP code 15NXB700-8 |
Manufacturer code 11115N0208 KTL Magnet + system Silver frame |
|
Product type Cone driver |
|
The 15NXB700 is neodymium bass loudspeaker designed to deliver high impact bass response, with exceptional high power capacity.
It features 25 mm high sandwich voice coil, aluminium die cast frame with integrated triple aluminium demodulating rings and vented neodymium magnet structure. The massive heatsink improve the cooling of the magnet structure, which reduce power compression. This results in an incredible high efficient transducer for subwoofer applications, with the ability to handle high excursion with low distortion and reduced thermal power compression. It is suitable for tuned reflex or horn loaded enclosures for high level subwoofer applications.
Application: Power bass
KEY FEATURES :
97 db 1W / 1m average sensitivity
100 mm high temperature sandwich voice coil
2000 W AES program power
Vented neodymium magnet assembly with massive heatsink
Triple aluminium demodulating rings for lower distortion and improved heat dissipation
Double silicon spider for improved excursion control and linearity
Water protected cone (front)
General |
|
Product type | Cone driver |
Brand | Oberton |
Reference | 15NXB700 |
Product code | 11115N0208 KTL Magnet + system Silver frame |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 15.5 inch |
Frequency coverage type | Sub, Low, Midbass |
Calculated sensitivity | 94.92 dB |
Nominal power handling | 1000 W |
Bandwidth | 38÷1000 Hz |
Fundamental parameters |
|
Mms | 156.84 gr |
Le | 1.98 mH |
Re | 5.23 ohm |
Small signal parameters |
|
Fs | 38.34 Hz |
Qes | 0.293 |
Qms | 8.75 |
Qts | 0.283 |
Vas | 105.5 L |
Datas |
|
Xmax | ±9 mm |
EBP | 131 Hz |
Fs / Qts | 135 Hz |
Vas * Qts² | 8.45 L |
Calculated efficiency | 1.95 % |
Weight | ~8.1 kg |
Dimensions |
|
Voice coil diameter | 4 inch |
Outside diameter | 388 mm |
Baffle cutout diameter | 354 mm |
Front thickness | 15.7 mm |
Depth after front | 179.3 mm |
Diamètre aimant (mm) | 180 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.