Speaker Peerless NCP-1230R01-08, 8 ohm, 12.48 inch
|
Peerless |
NCP-1230R01-08 |
Cone driver |
|
|
Brand Peerless |
TLHP code NCP-1230R01-08 |
|
|
Product type Cone driver |
|
|
Unavailable
-
This 12 inch 8 ohm speaker features a FEA optimized Neo magnet motor, a 3-inch high-temperature aluminum wire voice coil, and a high strength cast aluminum frame, specially designed motor cooling system incorporate with the cast aluminum heatsink can dramatically increase the power handling and reduce the power compression, the multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
General |
|
| Product type | Cone driver |
| Brand | Peerless |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 12.5 inch |
| Frequency coverage type | Low |
| Manufacturer sensitivity | 96.41 dB |
| Calculated sensitivity | 96.47 dB |
| Nominal power handling | 600 W |
Fundamental parameters |
|
| Sd | 539.13 cm² |
| Mms | 59 gr |
| Cms | 161 µm/N |
| Le | 0.73 mH |
| Re | 5.3 ohm |
| BL | 18.8 T.m |
Small signal parameters |
|
| Fs | 52 Hz |
| Qes | 0.32 |
| Qms | 4.1 |
| Qts | 0.29 |
| Vas | 66 L |
Datas |
|
| Xmax | ±7.1 mm |
| EBP | 163 Hz |
| Zmin | 6.44 ohm |
| Fs / Qts | 179 Hz |
| Vas * Qts² | 5.56 L |
| Calculated efficiency | 2.79 % |
| Weight | ~4.4 kg |
Dimensions |
|
| Voice coil diameter | 3 inch |
| Gap height | 10 mm |
| Outside diameter | 317 mm |
| Baffle cutout diameter | 289.5 mm |
| Front thickness | 10.1 mm |
| Depth after front | 143.3 mm |
| Diamètre aimant (mm) | 147 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Neodymium |
| Basket masterial | Aluminium |
Question about Peerless NCP-1230R01-08
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Peerless NCP-1230R01-08
This 12 inch 8 ohm speaker features a FEA optimized Neo magnet motor, a 3-inch high-temperature aluminum wire voice coil, and a high strength cast aluminum frame, specially designed motor cooling system incorporate with the cast aluminum heatsink can dramatically increase the power handling and reduce the power compression, the multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Peerless NCP-1230R01-08
SPL vs Impedance measure
Dimensions
