Speaker PHL Audio 2411, 16 ohm, 8 inch
|
PHL Audio |
2411 |
2411-16 |
Cone driver |
|
|
Brand PHL Audio |
Model 2411 |
TLHP code 2411-16 |
|
|
Product type Cone driver |
|
||
Unavailable
-
Natural convection Intercooler System. Double side coated diaphragm (Tropical withstanding). High compliance double half-roll Fabric Surround.
General |
|
| Product type | Cone driver |
| Brand | PHL Audio |
| Reference | 2411 |
Informations |
|
| Product manufacturer range | Non Standard |
| Nominal impedance | 16 ohm |
| Dimensional category | 8 inch, 9 inch |
| Frequency coverage type | Midbass, Midrange, High midrange |
| Manufacturer sensitivity | 94 dB |
| Calculated sensitivity | 93.7 dB |
| Nominal power handling | 250 W |
| Bandwidth | 70÷3000 Hz |
Fundamental parameters |
|
| Mms | 28 gr |
| Le | 2.475 mH |
| Re | 11.6 ohm |
| BL | 23 T.m |
Small signal parameters |
|
| Fs | 69 Hz |
| Qes | 0.27 |
| Qms | 4.88 |
| Qts | 0.25 |
| Vas | 12.6 L |
Datas |
|
| Xmax | ±4.5 mm |
| Calculated Xmax | ±5.1667 mm |
| EBP | 256 Hz |
| Zmin | 11.6 ohm |
| Fs / Qts | 276 Hz |
| Vas * Qts² | 0.79 L |
| Efficiency | 1.5 % |
| Calculated efficiency | 1.48 % |
| Weight | ~4.5 kg |
| Recommended load volume | 10 L |
| Fréquence d'accord liée à la charge | 80 Hz |
Dimensions |
|
| Voice coil diameter | 2 inch |
| Winding depth | 13 mm |
| Gap height | 8 mm |
| External dimensions | 205 | 234 mm |
| Baffle cutout diameter | 185 mm |
| Front thickness | 9.5 mm |
| Depth after front | 90 mm |
| Diamètre aimant (mm) | 158 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Surround material | Cloth |
Question about PHL Audio 2411-16
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
PHL Audio 2411-16, Range, version, replacement...
Informations PHL Audio 2411-16
Natural convection Intercooler System. Double side coated diaphragm (Tropical withstanding). High compliance double half-roll Fabric Surround.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes PHL Audio 2411-16
SPL vs Impedance measure
Distorsion measure
BL measure
Kms measure
Inductance measure
Dimensions
