Speaker PHL Audio 3440, 8 ohm, 10 inch
|
PHL Audio |
3440 |
3440-8 |
Cone driver |
|
|
Brand PHL Audio |
Model 3440 |
TLHP code 3440-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
Haut-parleur de grave/médium équipé d'une bobine mobile de 2.5 pouce et d'un système magnétique ferrite.
General |
|
| Product type | Cone driver |
| Brand | PHL Audio |
| Reference | 3440 |
Informations |
|
| Product manufacturer range | Non Standard |
| Nominal impedance | 8 ohm |
| Frequency coverage type | Midbass, Midrange, High midrange |
| Manufacturer sensitivity | 98 dB |
| Calculated sensitivity | 65.66 dB |
| Nominal power handling | 250 W |
| Bandwidth | 60÷3000 Hz |
Fundamental parameters |
|
| Mms | 35 gr |
| Le | 9.6 mH |
| Re | 9.6 ohm |
Small signal parameters |
|
| Fs | 61 Hz |
| Qes | 0.33 |
| Qms | 4.5 |
| Qts | 0.31 |
| Vas | 0.035 L |
Datas |
|
| Xmax | ±4.5 mm |
| EBP | 185 Hz |
| Fs / Qts | 197 Hz |
| Vas * Qts² | 0.01 L |
| Calculated efficiency | 0.01 % |
| Weight | ~5.8 kg |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
Question about PHL Audio 3440-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations PHL Audio 3440-8
Haut-parleur de grave/médium équipé d'une bobine mobile de 2.5 pouce et d'un système magnétique ferrite.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
