Speaker PHL Audio 5201M, 4 ohm, 15 inch
|
PHL Audio |
5201M |
5201M-4 |
Cone driver |
|
|
Brand PHL Audio |
Model 5201M |
TLHP code 5201M-4 |
|
|
Product type Cone driver |
|
||
Unavailable
-
Haut-parleur 38 cm de grave idéal en charge bass-reflex de 75 Litre accordée à 44 Hz, membrane traitée contre l'humidité.
General |
|
| Product type | Cone driver |
| Brand | PHL Audio |
| Reference | 5201M |
Informations |
|
| Product manufacturer range | Non Standard |
| Nominal impedance | 4 ohm |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 97 dB |
| Calculated sensitivity | 96.81 dB |
| Nominal power handling | 500 W |
| Bandwidth | 40÷2000 Hz |
Fundamental parameters |
|
| Mms | 114 gr |
| Le | 0.864 mH |
| Re | 3 ohm |
Small signal parameters |
|
| Fs | 38 Hz |
| Qes | 0.3 |
| Qms | 4.54 |
| Qts | 0.28 |
| Vas | 171.4 L |
Datas |
|
| Xmax | ±7.5 mm |
| EBP | 127 Hz |
| Fs / Qts | 136 Hz |
| Vas * Qts² | 13.44 L |
| Efficiency | 3 % |
| Calculated efficiency | 3.01 % |
| Weight | ~9.5 kg |
Dimensions |
|
| Voice coil diameter | 3 inch |
| Baffle cutout diameter | 356 mm |
| Front thickness | 12.8 mm |
| Depth after front | 155.5 mm |
| Diamètre aimant (mm) | 204 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
Question about PHL Audio 5201M-4
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations PHL Audio 5201M-4
Haut-parleur 38 cm de grave idéal en charge bass-reflex de 75 Litre accordée à 44 Hz, membrane traitée contre l'humidité.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Dimensions
