Compression driver
Europsonic
Unavailable |
|
MO65X 8 ohm
Compression driver Europsonic MO65X (8Ohm)
Moteur de compression titanium 1 pouce, avec sortie sur filetage 1" 3/8 (~35mm) en plastique noir, impédance 8 ohm, diamètre extérieur total ~120 mm, profondeur totale ~80 mm, longueur filetage ~16 mm.
7402
7402
|
Oberton
|
|
ND571CT 16 ohm
Oberton ND571CT compression driver, 16 ohm, 2 inch exit
14120N0316
14120N0316
|
LaVoce
|
|
DN14.301T 8 ohm
Compression driver Lavoce DN14.301T, 8 ohm, 1.4 inch
|
Monacor
Unavailable |
|
MRD-120 8 ohm
Compression driver Monacor MRD-120, 8 ohm, 1-inch throat, 1"3/8 thread
Moteur à pavillon, 50 W, 8 ?, filetage standard 35 mm (1 3/8 "), bonne linéarité de la bande de fréquences |
Faital Pro
Unavailable |
|
HF10RK 8 ohm
Compression driver FaitalPRO HF10RK, 16 ohm, 1 inch
00443985
00443985
|
Eighteen Sound
Unavailable |
|
ND1050 16 ohm
18 Sound ND1050 compression driver, 16 ohm, 1 inch exit
The ND1050 one inch exit high frequency compression driver is designed for high quality applications, where size is a critical issue. ND1050 high flux ultra compact magnetic assembly architecture, achieves the remarkable 1,9 Tesla value in the gap containing the external size in 75mm - 3 inches - making this HF driver a benchmark in its category. Equipped with Eighteen Sound proprietary Phase Plug architecture, the ultra compact ND1050 ensures a coherent wavefront at the horn entrance over all the working frequency range. The radial - tangerine phase plug design with short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction. The transducer diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value to 1.6kHz. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture contents environments. The ability to perform properly under inclement weather conditions is a key-point of the Eighteen Sound philosophy. The special treatment applied to the magnet and the top and back plates of the magnetic structure makes the driver more resistant to the corrosive effects of salts and oxidization than any other treatment used by other manufacturers.
DRV101050TP16NA - 0421T6N500
DRV101050TP16NA - 0421T6N500
|
B&C Speakers
|
|
8 ohm
Compression driver B&C Speakers DE902, 8 ohm, special for coax
DRV9028
DRV9028
|
Oberton
|
|
D2526 16 ohm
Oberton D2526 compression driver, 8 ohm, 1 inch exit
14110F0516
14110F0516
|
