Mundorf MCap Evo
Capacitors 250VDC to 450VDC, from +/- 3% to +/- 5%, MKP Polypropylene metallized aluminum, optimized geometry. The SCR SmartCap series is a good alternative to the Evo from Mundorf.
Mundorf MCap Evo capacitors are the replacements for the RXF series. These "Evo" capacitors are available through three ranges: Evo (standard), Evo Oil (oiled) and Evo Silver Gold Oil (silver / oiled gold). Mundorf Evo capacitors allow you to move upmarket compared to the traditional MCap 250/400/630 series.
Mundorf
€11.61 IT/piece |
|
Mundorf MCap Evo capacitor, 5.6µF ±3%, 450VDC/310VAC, Ø30xL27mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-5,60T3.450
ME-5,60T3.450
|
Mundorf
€49.99 IT/piece |
|
Mundorf MCap Evo capacitor, 47µF ±3%, 350VDC/240VAC, Ø50xL50mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-47T3.350
ME-47T3.350
|
Mundorf
€10.78 IT/piece |
|
Mundorf MCap Evo capacitor, 4.7µF ±3%, 450VDC/310VAC, Ø30xL27mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-4,70T3.450
ME-4,70T3.450
|
Mundorf
€41.65 IT/piece |
|
Mundorf MCap Evo capacitor, 33µF ±3%, 450VDC/310VAC, Ø65xL35mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-33T3.450
ME-33T3.450
|
Mundorf
€166.82 IT/piece |
|
Mundorf MCap Evo capacitor, 330µF ±3%, 250VDC/170VAC, Ø75xL90mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-330T3.250
ME-330T3.250
|
Mundorf
€10.78 IT/piece |
|
Mundorf MCap Evo capacitor, 3.9µF ±3%, 450VDC/310VAC, Ø25xL27mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-3,90T3.450
ME-3,90T3.450
|
Mundorf
€10.78 IT/piece |
|
Mundorf MCap Evo capacitor, 3.3µF ±3%, 450VDC/310VAC, Ø30xL21mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-3,30T3.450
ME-3,30T3.450
|
Mundorf
€125.10 IT/piece |
|
Mundorf MCap Evo capacitor, 270µF ±3%, 250VDC/170VAC, Ø65xL90mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-270T3.250
ME-270T3.250
|
