Search page for coils with filtering by capacitance in µF and price. Select filters to bring out the coils corresponding to your search.
Mundorf
€64.20 IT/piece |
Mundorf VSCU12 feron core copper foil paper coil, 1.2mH ±3%, 0.06ohm, 1.98mm OFC-copper wire, L130xH40xZ40mm, with vaccum impregnated wire
VSCU12-1,2
VSCU12-1,2
|
Mundorf
€128.48 IT/piece |
Mundorf VN125 feron core coil, 27mH ±5%, 0.53ohm, 1.25mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€119.85 IT/piece |
Mundorf VL390 air core coil, 0.18mH ±2%, 0.02ohm, 3.90mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL390-0,18
VL390-0,18
|
Mundorf
€141.30 IT/piece |
Mundorf VLCU15 paper air copper foil coil, 6.8mH ±2%, 0.96ohm, 22x0.07mm OFC-copper wire, Ø108xH30mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU15-6,8
VLCU15-6,8
|
Mundorf
€20.48 IT/piece |
Mundorf P140 ferrite pipe core coil, 0.82mH ±3%, 0.16ohm, 1.40mm OFC-copper wire, Ø45xH30mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P140-0,82
P140-0,82
|
Visaton
€6.94 IT/piece |
KN 3,3 MH- 0,6 MM
Ferrite core coil Visaton KN 3.3 mH, diameter 32 mm, wire 0.6 mm, Rdc 1.4 ohm
Ferrite core wire Ø 0.6 mm 3.3 mH
3806
3806
|
Mundorf
Unavailable |
Mundorf BS100 feron core coil, 1.8mH ±3%, 0.23ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x20xH20mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
Mundorf BS180 feron core coil, 5.6mH ±3%, 0.17ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 130x37xH37mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |