Search page for coils with filtering by capacitance in µF and price. Select filters to bring out the coils corresponding to your search.
Monacor
€7.27 IT/piece |
Air core coil Monacor LSIP-33/1, 0.33mH, 0.3ohm, Ø48 x 19mm
Self à air Monacor LSIP-33/1, inductance 0.33 mH conducteur ø 1.0 mm, puissance 150 WRMS, Rdc 0.3 ?, dimensions ø 48 mm x 19 mm |
Mundorf
€18.70 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 0.22mH ±2%, 0.2ohm, 11.5x0.07mm OFC-copper wire, Ø40xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,22
VLCU18-0,22
|
Mundorf
€38.34 IT/piece |
Mundorf BL71 air core coil, 15mH ±2%, 4.3ohm, 0.71mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
In stock |
Mundorf LL60 litz wire air core coil, 0.18mH ±2%, 0.1ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø22xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,18
LL60-0,18
|
Mundorf
€93.84 IT/piece |
Mundorf BL140 air core coil, 8.2mH ±2%, 1.1ohm, 1.40mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-8,20
BL140-8,20
|
Mundorf
€12.74 IT/piece |
Mundorf L100 air core coil, 0.82mH ±2%, 0.44ohm, 1.00mm OFC-copper wire, Ø40xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-0,82
L100-0,82
|
Visaton
€17.25 IT/piece |
KN 27,0 MH- 0,6 MM
Ferrite core coil Visaton KN 27 mH, diameter 55 mm, wire 0.6 mm, Rdc 6.4 ohm
Ferrite core wire Ø 0.6 mm 27 mH
3818
3818
|
Mundorf
€25.58 IT/piece |
Mundorf BH125 ferrite core coil, 3.9mH ±3%, 0.24ohm, 1.25mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-3,9
BH125-3,9
|