Compression driver Monacor MRD-120, 8 ohm, 1-inch throat, 1"3/8 thread
|
Monacor |
MRD-120 |
MRD-120-8 |
Compression driver |
|
|
Brand Monacor |
Model MRD-120 |
TLHP code MRD-120-8 |
|
|
Product type Compression driver |
|
||
![Compression driver Monacor MRD-120, 8 ohm, 1-inch throat, 1"3/8 thread](https://en.toutlehautparleur.com/media/catalog/product/cache/15/image/cfaa36b7790e58591c6f887e332872c4/m/r/mrd-120-8.jpg "Compression driver Monacor MRD-120, 8 ohm, 1-inch throat, 1"3/8 thread")
Unavailable
-
Moteur à pavillon, 50 W, 8 ?, filetage standard 35 mm (1 3/8 "), bonne linéarité de la bande de fréquences
General |
|
| Product type | Compression driver |
| Brand | Monacor |
| Reference | MRD-120 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 4.5 inch |
| Manufacturer sensitivity | 107 dB |
| Nominal power handling | 50 W |
| Max power handling | 100 W |
| Bandwidth | 1300÷17500 Hz |
| Recommended min cutoff frequency | 3000 Hz |
| Exit dimension | 1.0 inch |
Small signal parameters |
|
| Fs | 1300 Hz |
Dimensions |
|
| Voice coil diameter | 1.5 inch |
| Outside diameter | 120 mm |
| Depth | 85 mm |
| Diamètre aimant (mm) | 120 mm |
| Driver mounting system | 1"3/8 male thread (~34mm) |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Monacor MRD-120-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Monacor MRD-120-8, Range, version, replacement...
Repair Monacor MRD-120-8
Informations Monacor MRD-120-8
Moteur à pavillon, 50 W, 8 ?, filetage standard 35 mm (1 3/8 "), bonne linéarité de la bande de fréquences
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Monacor MRD-120-8
SPL vs Impedance measure
Dimensions
