Audax |
HT210G2 |
HT210G2-8 |
101219N |
Cone driver |
|
Brand Audax |
Model HT210G2 |
TLHP code HT210G2-8 |
Manufacturer code 101219N |
|
Product type Cone driver |
|
High losse-High compliance rubber surround. Critically damped steel chassis. High temperature voice coil (40 mm). Aluminium voice coil former. Extedned bass response (Fs : 31 Hz). The cosmetic ring (black plastic) can be removed from the basket, then the external shape becomes round and the external diameter is 209 mm. (have a look at different case photos).
Designed for high-end compact 2 way systems, this 8 inch bass-midrange driver features a state of the art curvilinear paper cone, which is critically damped and coupled to a high loss rubber surround. Special consideration has been taken to ensure a smooth response, natural roll-off. A newly designed cosmetic ring helps to reduse edge diffraction. The high temparature, 1.57 inch voice coil, wound onto aluminium former, ensures excellent power handling.
General |
|
Product type | Cone driver |
Brand | Audax |
Reference | HT210G2 |
Product code | 101219N |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 8.5 inch |
Frequency coverage type | Sub |
Manufacturer sensitivity | 90 dB |
Calculated sensitivity | 90.23 dB |
Nominal power handling | 70 W |
Fundamental parameters |
|
Sd | 230 cm² |
Mms | 23 gr |
Le | 0.61 mH |
Re | 6.5 ohm |
BL | 8.6 T.m |
Small signal parameters |
|
Fs | 31 Hz |
Qes | 0.38 |
Qms | 3.07 |
Qts | 0.34 |
Vas | 88 L |
Datas |
|
Flux density | 1 T |
Xmax | ±4.5 mm |
Calculated Xmax | ±6.5 mm |
EBP | 82 Hz |
Zmin | 7 ohm |
Fs / Qts | 91 Hz |
Vas * Qts² | 10.18 L |
Calculated efficiency | 0.67 % |
Dimensions |
|
Voice coil diameter | 1.57 inch |
Winding depth | 15 mm |
Gap height | 6 mm |
External dimensions | 213.5 | 213.5 mm |
Baffle cutout diameter | 184 mm |
Front thickness | 10.5 mm |
Depth after front | 88 mm |
Diamètre aimant (mm) | 102 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Acier |
Voice coil former | Aluminium |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.