Speaker Peerless SBS-160F35CP01-04, 4 ohm, 6.61 inch

Brand 
Peerless
SKU 
SBS-160F35CP01-04
Product type 
Cone driver
Brand
Peerless
TLHP code
SBS-160F35CP01-04
Product type 
Cone driver

Unavailable

  • Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

    This series of coils is particularly suitable for subwoofer filtering when looking for a good size / inductance ratio, a low DRC and an affordable price. The BS series, completely redesigned in 2010, replaced the famous Mundorf i and Bi series.

    Regarding the manufacturing process, once the coil is wound, it is heated by means of an electric pulse melting the layer of varnish. When cooling, the individual windings are firmly bound together by the baked varnish and are thus prevented from vibrating and the original signal remains intact.

General

Product type Cone driver
Brand Peerless
Product code SBS-160F35CP01-04

Informations

Nominal impedance 4 ohm
Dimensional category 6.5 inch
Frequency coverage type Sub, Low, Midbass
Manufacturer sensitivity 80.7 dB
Calculated sensitivity 80.96 dB
Nominal power handling 100 W
Bandwidth 40÷1000 Hz

Fundamental parameters

Mms 46.8 gr
Le 0.93 mH
Re 4.1 ohm

Small signal parameters

Fs 48.54 Hz
Qes 0.75
Qms 3.57
Qts 0.62
Vas 5.35 L

Datas

Xmax ±8.5 mm
EBP 65 Hz
Fs / Qts 78 Hz
Vas * Qts² 2.06 L
Calculated efficiency 0.08 %
Weight ~1.8 kg

Dimensions

Voice coil diameter 1.4 inch
Outside diameter 168 mm
Baffle cutout diameter 143 mm
Front thickness 10.3 mm
Depth after front 90.2 mm
Diamètre aimant (mm) 100 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite


Question about Peerless SBS-160F35CP01-04

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations Peerless SBS-160F35CP01-04

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

This series of coils is particularly suitable for subwoofer filtering when looking for a good size / inductance ratio, a low DRC and an affordable price. The BS series, completely redesigned in 2010, replaced the famous Mundorf i and Bi series.

Regarding the manufacturing process, once the coil is wound, it is heated by means of an electric pulse melting the layer of varnish. When cooling, the individual windings are firmly bound together by the baked varnish and are thus prevented from vibrating and the original signal remains intact.

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes Peerless SBS-160F35CP01-04

SPL vs Impedance measure

Image spl vs impedance measure cone driver Peerless Speaker Peerless SBS-160F35CP01-04, 4 ohm, 6.61 inch

Dimensions

Image Drawing & Mounting cone driver Peerless Speaker Peerless SBS-160F35CP01-04, 4 ohm, 6.61 inch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x