Compression driver

Oberton
D3671-8

€145.01 IT/piece
In stock

D3671
8 ohm

Compression driver Oberton D3671, 8 ohm, 1.4 inch

14114F0708

B&C Speakers
DE1090TN-8

€369.41 IT/piece
In stock

DE1090TN
8 ohm

Compression driver B&C Speakers DE1090TN, 8 ohm, 1.4 inch throat diameter

DRV1090TN8

LaVoce
DN14.30T-16

€307.34 IT/piece
In stock

DN14.30T
16 ohm

Compression driver Lavoce DN14.30T, 16 ohm, 1.4 inch

VLR93145

Eighteen Sound
ND1030-8

€113.66 IT/piece
In stock

ND1030
8 ohm

18 Sound ND1030 compression driver, 8 ohm, 1 inch exit

The ND1030 1-inch exit high frequency compression driver has been designed for use in high quality two-way audio systems. The ND1030 exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 900Hz free air resonance frequency, the ND1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope. Equipped with unique Phase Plug architecture, the ND1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug design with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The ND1030 titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1kHz to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments. By careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 18KGauss in the gap within a compact and lightweight structure.

1 Review(s)

DRV101030TI08NA - 0421T8M800