Compression driver

Currently Shopping by

Driver mounting system

2 points on diameter 76 mm (x)

Oberton
ND44-16

€118.20 IT/piece
In stock

ND44

Compression driver Oberton ND44, 16 ohm, 1 inch

Driver mounting system 2 points on diameter 76 mm

14110N0316

Oberton
ND44-8

€118.20 IT/piece
In stock

ND44

Compression driver Oberton ND44, 8 ohm, 1 inch

Driver mounting system 2 points on diameter 76 mm

14110N0308

Eighteen Sound
ND1030-16

Unavailable

ND1030

18 Sound ND1030 compression driver, 16 ohm, 1 inch exit

Driver mounting system 2 points on diameter 76 mm

DRV101030TI16NA

Eighteen Sound
ND1030-8

€113.66 IT/piece
In stock

ND1030

18 Sound ND1030 compression driver, 8 ohm, 1 inch exit

The ND1030 1-inch exit high frequency compression driver has been designed for use in high quality two-way audio systems. The ND1030 exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 900Hz free air resonance frequency, the ND1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope. Equipped with unique Phase Plug architecture, the ND1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug design with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The ND1030 titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1kHz to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments. By careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 18KGauss in the gap within a compact and lightweight structure.

1 Review(s)

Driver mounting system 2 points on diameter 76 mm

DRV101030TI08NA - 0421T8M800

B&C Speakers
DE25-16

€111.62 IT/piece
Out of stock

DE25

Compression driver B&C Speakers DE25, 16 ohm, 1.0 inch throat diameter

1" high frequency compression driver. Low mass mylar diaphragm ensures an extremely flat frequency response and optimized ceramic magnet assembly, results in high sensitivity and low distortion up to 18 kHz.