B&C Speakers
€1,323.64 IT/piece |
21IPAL 1 ohm
Speaker B&C Speakers 21IPAL, 1 ohm, 21 inch
When used with the Powersoft IPAL power amp modules, the 21PAL can provide extreme output in a very small, dependable package. For more information, visit the Powersoft Website.
ALT21IPAL
ALT21IPAL
|
LaVoce
€244.13 IT/piece |
WAF154.03 8 ohm
Speaker Lavoce WAF154.03, 8 ohm, 15 inch
VLR1015C
VLR1015C
|
B&C Speakers
€193.07 IT/piece |
8NW51 4 ohm
Speaker B&C Speakers 8NW51, 4 ohm, 8 inch
ALT008NW514
ALT008NW514
|
Eighteen Sound
€345.60 IT/piece |
15NMB1000 8 ohm
18 Sound 15NMB1000 speaker, 8 ohm, 15 inch
ALT151000WF08NA
ALT151000WF08NA
|
B&C Speakers
€289.25 IT/piece |
14NDL88 16 ohm
Speaker B&C Speakers 14NDL88, 16 ohm, 13.5 inch
ALT14NDL8816
ALT14NDL8816
|
Eminence
€244.19 IT/piece |
SIGMA PRO 18A-2 8 ohm
Speaker Eminence SIGMA PRO 18A-2, 8 ohm, 18 inch
18384B-U
18384B-U
|
BMS
€233.61 IT/piece |
8N515 8 ohm
Speaker BMS 8N515, 8 ohm, 8 inch
96 dB Sensitivity 1 W / 1 m 200 W Power Handling Extremely light Weight of 1.98 kg 2" Aluminium Sandwich Voice Coil for low Power Compression Double treated Cone for Water Protection Neodymium Magnet System Triple Aluminum demodulating Rings for ultra low Distortion Optimal for compact 2- or 3-way Systems
BMS-8N515-8
BMS-8N515-8
|
Eighteen Sound
€337.92 IT/piece |
15LW2400 4 ohm
18 Sound 15LW2400 speaker, 4 ohm, 15 inch
The 15LW2400 has been developed as an evolution of the 15LW1401 low frequency transducer, setting a new industry standard in 15" (380 mm) ferrite high performance transducers. The speaker has been designed for use as a low bass or sub-woofer component in a compact cabinet (60 - 130 lt) reflex configuration, providing clean, linear, undistorted low frequency reproduction at very high power levels. The high excursion capabilities of the Double Silicon Spider (DSS) enable the 15LW2400 to achieve high levels of linear travel and maintain full control of the moving mass. The fiberglass fiber reinforced, straight-sided ribbed cone assures smooth response with high internal damping. The 100 mm Ø copper voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The weight of the windings are evenly distributed, providing a uniform motive drive. The already low distortion and sound quality of 15LW2400 has been further improved by the Double Demodulation Rings (DDR) designed to dramatically reduce the intermodulation and harmonic distortion whilst improving the transient response. Excellent heat dissipation has been achieved by incorporating air channels between the basket and the top plate of the magnet. Further ventilation is provided using air vents in the back plate that direct air into the lower part of the voice coil gap. In order to furtherly increase power handling and reduce power compression figure, 15LW2400 uses the same voice coil ventilation technology developed for our flagship 9000 neodymium transducer series. A low density material air diffractor is placed into the backplate acting as a cooling system, increasing power handling capability and lowering the power compression figure. As a final result the transducer shows 1 dB reduction in full power power compression value if compared to 15LW1401, and a program power handling value of 2400 Watt. 10% reduction in weight have been obtained optimizing the magnetic structure through advanced FEA CAD simulation tools. The 15LW2400 ability to perform properly under inclement weather conditions has been achieved using an exclusive cellulose treatment which gives water repellent properties to both sides of the cone. In addition, an epoxy coating is applied to metal plates in order to resist against the corrosive effects of salts and oxidization.
ALT152400WF04FA - 0221542400
ALT152400WF04FA - 0221542400
|