Cone speaker
Eighteen Sound
€161.28 IT/piece |
|
8NMB420 8 ohm
18 Sound 8NMB420 speaker, 8 ohm, 8 inch
The 8NMB420 neodymium transducer has been developed in response to a specific market requirement for a 8" midbass driver that combines excellent linearity with good efficiency and high power handling capabilities. 8NMB420 is primarily intended for use as a midbass driver in compact 2-way or multiway reflex enclosures comprising line arrays. The parameters had been chosen to offer significant low frequency output in vented enclosure with size starting from 20 lit. with a tuning frequency around 60Hz. The low pass filter might be positioned as high as 2000-2500Hz. Multiple 8NMB420 units might be used: the compact size reflects in the capability to have precise attack time. This characteristic makes it the ideal choice for stage monitoring and bass guitar amplification. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio. The exclusive dedicated double roll surround design offers enhanced linear travel and control, in order to reproduce precisely low frequency. The curvilinear paper cone is formed using a unique wood pulp composition designed to achieve the best possible rigidity and stiffness. The 50mm inside outside aluminum voice coil employs Interleaved Sandwich Voice coil (ISV) technology. It is composed by a high strength fiberglass former used to carry windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high force factor or BL. The voice coil is cooled incorporating airways between the chassis back plate and the magnet faceplate so that heated air is channeled away from the voice coil and gap and dissipated by the chassis basket. Thanks to the increasing use during outdoor audio events, the ability to perform in humid environments is a key feature of the 8NMB420. This is achieved trough a proprietary humidity repellent cone treatment without a moving speaker mass increase.
ALT080420WF08NA - 022088N400
ALT080420WF08NA - 022088N400
|
B&C Speakers
€285.77 IT/piece |
|
8NSM64 16 ohm
Speaker B&C Speakers 8NSM64, 16 ohm, 8 inch
ALT008NSM6416
ALT008NSM6416
|
LaVoce
€32.81 IT/piece |
|
FAN030.71 4 ohm
Fullrange speaker Lavoce FAN030.71, 4 ohm, 3 inch
VLR06033
VLR06033
|
Ciare
€281.88 IT/piece |
|
15.00SW 8 ohm
Speaker Ciare 15.00SW, 8 ohm, 15 inch
|
PHL Audio
€141.67 IT/piece |
|
1040 8 ohm
Speaker PHL Audio 1040, 8 ohm, 6.5 inch
Mainly designed for sound reinforcement direct radiation multi way systems of small to medium throw (Bandpassed at 500Hz - 4000Hz in a sealed enclosure not exceeding 3L). Their use in conjunction with a suitable horn allows them to equip long throw systems with a sound quality superior to that produced by any other HF compression chamber. |
BMS
€408.99 IT/piece |
|
12N804 4 ohm
Speaker BMS 12N804, 4 ohm, 12 inch
95 dB Sensitivity 1 W / 1 m 1100 W Power Handling 4" Sandwch Voice Coil for low Power Compression Double treated Cone for Water Protection Neodymium Magnet Triple Aluminum demodulating Rings for ultra low Distortion Optimal for compact Subwoofers
BMS-12N804-4
BMS-12N804-4
|
BMS
€368.40 IT/piece |
|
12N802 16 ohm
Speaker BMS 12N802, 16 ohm, 12 inch
98 dB Sensitivity 1 W / 1 m 1000 W Power Handling 4" Copper Sandwich Voice Coil for low Power Compression Double treated Cone for Water Protection Neodymium Magnet System Triple Aluminum demodulating Rings for ultra low Distortion Optimal for compact 2- or 3-way Systems
BMS-12N802-16
BMS-12N802-16
|
Eminence
€315.41 IT/piece |
|
KILOMAX PRO 18A 8 ohm
Speaker Eminence KILOMAX PRO-18A, 8 ohm, 18 inch
18299D-U
18299D-U
|
