Peerless |
NE65W-04 |
Cone driver |
|
Brand Peerless |
TLHP code NE65W-04 |
|
Product type Cone driver |
|
This 2 inch 4 ohm member of the NE family has leading-edge transducer technology packaged in a cutting edge, stylistic design. The full-range drivers in this family feature an innovative cast aluminium basket design which minimizes acoustic reflections inside the driver, through large basket windows and sculpted basket spokes. The basket also is designed to act as a highly coupled heat sink to the Neodymium-Iron-Boron magnet (NdFeB) motor, so as to improve power handling capacity. The cone is aluminium, with a butyl rubber surround designed through finite element analysis for linearity of performance. The voice coil bobbin is titanium, for improved performance. The FEA-designed motor features copper caps to minimize inductance and extend performance to high frequencies.
General |
|
Product type | Cone driver |
Brand | Peerless |
Informations |
|
Nominal impedance | 4 ohm |
Dimensional category | 2.5 inch |
Frequency coverage type | Fullrange |
Manufacturer sensitivity | 82.7 dB |
Calculated sensitivity | 82.31 dB |
Nominal power handling | 25 W |
Bandwidth | 170÷18000 Hz |
Fundamental parameters |
|
Mms | 1.6 gr |
Le | 0.04 mH |
Re | 3.66 ohm |
Small signal parameters |
|
Fs | 166 Hz |
Qes | 0.74 |
Qms | 5.01 |
Qts | 0.65 |
Vas | 0.18 L |
Datas |
|
Xmax | ±1.7 mm |
EBP | 224 Hz |
Fs / Qts | 255 Hz |
Vas * Qts² | 0.08 L |
Calculated efficiency | 0.11 % |
Weight | ~0.15 kg |
Dimensions |
|
Voice coil diameter | 1 inch |
Outside diameter | 65.14 mm |
Baffle cutout diameter | 54.9 mm |
Front thickness | 4.5 mm |
Depth after front | 33.3 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.