PHL Audio |
1290 |
1290-16 |
Cone driver |
|
Brand PHL Audio |
Model 1290 |
TLHP code 1290-16 |
|
Product type Cone driver |
|
Dedicated to proximity sound reinforcement systems these models are optimum for two way Bass-Reflex systems using one or two drivers per system, with a X-over frequency situated around 3kHz to 5kHz.
Their particular design prevents over-excursion damage making them extremely rugged without any counterpart in the sound which remains accurate and dynamic.
Recommended Reflex enclosure is 10L to 12L tuned from 60Hz to 65Hz.
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 1290 |
Informations |
|
Product manufacturer range | Non Standard |
Nominal impedance | 16 ohm |
Dimensional category | 6.5 inch, 7.5 inch |
Frequency coverage type | Low, Midbass, Midrange |
Manufacturer sensitivity | 92 dB |
Calculated sensitivity | 91.65 dB |
Nominal power handling | 100 W |
Bandwidth | 50÷4000 Hz |
Fundamental parameters |
|
Sd | 143 cm² |
Mms | 13 gr |
Cms | 690 µm/N |
Le | 1.36 mH |
Re | 12.1 ohm |
BL | 13.1 T.m |
Small signal parameters |
|
Fs | 53 Hz |
Qes | 0.31 |
Qms | 3.94 |
Qts | 0.28 |
Vas | 19.9 L |
Datas |
|
Xmax | ±4 mm |
Calculated Xmax | ±5.25 mm |
EBP | 171 Hz |
Zmin | 14.2 ohm |
Fs / Qts | 189 Hz |
Vas * Qts² | 1.57 L |
Efficiency | 0.9 % |
Calculated efficiency | 0.92 % |
Weight | ~2.2 kg |
Air volume occupied by the driver | 0.5 L |
Dimensions |
|
Voice coil diameter | 1.5 inch |
Winding depth | 12.5 mm |
Gap height | 6 mm |
External dimensions | 162.5 | 187.5 mm |
Baffle cutout diameter | 146 mm |
Depth | 76.5 mm |
Front thickness | 8 mm |
Depth after front | 68.5 mm |
Diamètre aimant (mm) | 117.5 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Aluminium |
Surround shape | Double roll |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.