PHL Audio |
5051 |
5051M-8 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 5051 |
TLHP code 5051M-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
This product is in the process of supply to be in stock.
Reserved on order
Indicative average supply lead time: 14 weeks
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 5051 |
Informations |
|
Product manufacturer range | Standard |
Nominal impedance | 8 ohm |
Dimensional category | 15 inch, 16 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 98 dB |
Calculated sensitivity | 97.52 dB |
Nominal power handling | 500 W |
Max power handling | 1000 W |
Bandwidth | 40÷2000 Hz |
Fundamental parameters |
|
Sd | 892 cm² |
Mms | 110 gr |
Cms | 170 µm/N |
Rms | 6 kg/s |
Le | 0.74 mH |
Re | 5.6 ohm |
BL | 23.4 T.m |
Small signal parameters |
|
Fs | 37 Hz |
Qes | 0.26 |
Qms | 4.26 |
Qts | 0.25 |
Vas | 189.57 L |
Datas |
|
Xmax | ±6 mm |
Calculated Xmax | ±8.3333 mm |
Xvar, Xmech, Xlim | ±14 mm |
EBP | 142 Hz |
Zmin | 6.9 ohm |
Fs / Qts | 148 Hz |
Vas * Qts² | 11.85 L |
Efficiency | 3.59 % |
Calculated efficiency | 3.55 % |
Air volume occupied by the driver | 4.4 L |
Demodulation ring | Yes |
Dimensions |
|
Voice coil diameter | 3 inch |
Winding depth | 20 mm |
Gap height | 10 mm |
External dimensions | 380.5 | 406.5 mm |
Baffle cutout diameter | 356 mm |
Depth | 168.5 mm |
Front thickness | 13 mm |
Depth after front | 155.5 mm |
Diamètre aimant (mm) | 204 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Magnesium |
Voice coil former | Glass fiber |
Surround shape | Double roll |
Surround material | Cloth |
Dome material | Paper |
Cone shape | Exponential |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.