HP Cône Swans F6 (8Ohm)
|
Swans / Hivi |
F6 |
F6-8 |
Cone driver |
Sold by 4 pieces minimum |
|
|
Brand Swans / Hivi |
Model F6 |
TLHP code F6-8 |
||
|
Product type Cone driver |
Sales packaging Sold by 4 pieces minimum |
|
||
-
Hi-Vi enjoys high prestige low-midrange loudspeaker unit of the world!
The Swans M1.2 sound box that adopts the F6 is being subjected to numerous good opinions at home and abroad.
Using leading technology of Small/Thiele parameters
Light and extremely rigid cone made from Kevlar? Paper composite
Germany special manufactured anti-tired high loss natural rubber surround: fully absorb unwanted vibration energy!
Britain produced high-transparent and high-steady spider-can improve the characteristic of compliance air compressing
Linear frequency phase correcting design: the plug improves frequency response and dispersion as well.
Full sealed double magnet high performance antimagnetic system: dynamical linear drive resource.
Hi-Vi Symmetric Motor Drive (SMD) technology makes the voice coil into a symmetrical driving magnetic field, thus acquiring symmetrical driving force, reducing the mutual modulation of voice coil inductance and back electromotive force, improving the controllability of the speakers, achieving low distortion degree
Finite Element Analysis for high density aluminum frame, prevents the parasitic structural resonances
High power handling, heat-resistant Kapton?voice coil former: the guarantee of high quality bass.
Sound Features: natural, accurate, high analysis, energetic.
Suitable for bass unit of two-way vented loudspeaker system, and also suitable for mid-range unit of 3-way loudspeaker system
General Data
Nominal Power Handling (Pnom)(W) 45
Max Power Handling (Pmax)(W) 90
Sensitivity (2.83v/1m)(dB) 88
Weight (M)(Kg) 2.1
Electrical Data
Nominal Impedance (Z)(?) 8
DC (Re)(?) 6.5
Voice Coil and Magnet Parameters
VC Diameter (mm) 25
VC Length (H)(mm) 14.5
VC Former SV
VC Frame Kapton
Magnet System Shielded
Magnet Former Ferrite
Force Factor (BL)(N/A) 9
Gap Height (He)(mm) 6
Linear Excursion (Xmax)(mm) 4.3
T-S Parameters
Suspension Compliance (Cms)(uM/N) 658
Mechanical Q (Qms) 3.91
Electrical Q (Qes) 0.38
Total Q (Qts) 0.35
Moving Mass (Mms)(g) 18.3
Effective Piston Area (Sd)(m2) 0.0139
Equivalent Air Volume (Vas)(L) 16.4
Resonance Frequency (Fs)(Hz) 45
General |
|
| Product type | Cone driver |
| Brand | Swans / Hivi |
| Reference | F6 |
Informations |
|
| Nominal impedance | 8 ohm |
Datas |
|
| Weight | ~2.3 kg |
Question about Swans / Hivi F6-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Swans / Hivi F6-8
The Swans M1.2 sound box that adopts the F6 is being subjected to numerous good opinions at home and abroad.
Using leading technology of Small/Thiele parameters
Light and extremely rigid cone made from Kevlar? Paper composite
Germany special manufactured anti-tired high loss natural rubber surround: fully absorb unwanted vibration energy!
Britain produced high-transparent and high-steady spider-can improve the characteristic of compliance air compressing
Linear frequency phase correcting design: the plug improves frequency response and dispersion as well.
Full sealed double magnet high performance antimagnetic system: dynamical linear drive resource.
Hi-Vi Symmetric Motor Drive (SMD) technology makes the voice coil into a symmetrical driving magnetic field, thus acquiring symmetrical driving force, reducing the mutual modulation of voice coil inductance and back electromotive force, improving the controllability of the speakers, achieving low distortion degree
Finite Element Analysis for high density aluminum frame, prevents the parasitic structural resonances
High power handling, heat-resistant Kapton?voice coil former: the guarantee of high quality bass.
Sound Features: natural, accurate, high analysis, energetic.
Suitable for bass unit of two-way vented loudspeaker system, and also suitable for mid-range unit of 3-way loudspeaker system
General Data
Nominal Power Handling (Pnom)(W) 45
Max Power Handling (Pmax)(W) 90
Sensitivity (2.83v/1m)(dB) 88
Weight (M)(Kg) 2.1
Electrical Data
Nominal Impedance (Z)(?) 8
DC (Re)(?) 6.5
Voice Coil and Magnet Parameters
VC Diameter (mm) 25
VC Length (H)(mm) 14.5
VC Former SV
VC Frame Kapton
Magnet System Shielded
Magnet Former Ferrite
Force Factor (BL)(N/A) 9
Gap Height (He)(mm) 6
Linear Excursion (Xmax)(mm) 4.3
T-S Parameters
Suspension Compliance (Cms)(uM/N) 658
Mechanical Q (Qms) 3.91
Electrical Q (Qes) 0.38
Total Q (Qts) 0.35
Moving Mass (Mms)(g) 18.3
Effective Piston Area (Sd)(m2) 0.0139
Equivalent Air Volume (Vas)(L) 16.4
Resonance Frequency (Fs)(Hz) 45
Name HP Cône Swans F6 (8Ohm)
SKU F6-8
Price € 47.40 39.5 Out of stock
Buy HP Cône Swans F6 (8Ohm)
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
