PHL Audio |
3541 |
3541-4 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 3541 |
TLHP code 3541-4 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
Noiseless natural convection Intercooling System. High compliance double half-roll Fabric Surround for low Fs. Dual side coated diaphragm.
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 3541 |
Informations |
|
Product manufacturer range | Non Standard |
Nominal impedance | 4 ohm |
Dimensional category | 10 inch, 11 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 93.5 dB |
Calculated sensitivity | 93.41 dB |
Nominal power handling | 300 W |
Bandwidth | 40÷3000 Hz |
Fundamental parameters |
|
Sd | 356 cm² |
Mms | 55 gr |
Le | 0.423 mH |
Re | 2.2 ohm |
BL | 11.6 T.m |
Small signal parameters |
|
Fs | 49 Hz |
Qes | 0.28 |
Qms | 5.46 |
Qts | 0.26 |
Vas | 34.1 L |
Datas |
|
Xmax | ±7 mm |
Calculated Xmax | ±7.6667 mm |
EBP | 175 Hz |
Zmin | 2.3 ohm |
Fs / Qts | 188 Hz |
Vas * Qts² | 2.31 L |
Efficiency | 1.4 % |
Calculated efficiency | 1.38 % |
Weight | ~6 kg |
Recommended load volume | 20 L |
Fréquence d'accord liée à la charge | 60 Hz |
Dimensions |
|
Voice coil diameter | 2.52 inch |
Winding depth | 18 mm |
Gap height | 8 mm |
External dimensions | 254.5 | 283.5 mm |
Baffle cutout diameter | 228 mm |
Front thickness | 11 mm |
Depth after front | 109 mm |
Diamètre aimant (mm) | 172.4 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.