Speaker Monacor SPP-110/8, 8 ohm, 7.87 x 7.87 inch
|
Monacor |
SPP-110/8 |
SPP-110/8-8 |
Cone driver |
|
|
Brand Monacor |
Model SPP-110/8 |
TLHP code SPP-110/8-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
Haut-parleurs de grave-médium Hi-Fi, 60 WMAX, 30 WRMS, 8 ?
Avec membrane PVC / Carbone
Perçage des pièces polaires
Réponse en fréquence linéaire dans de très petites enceintes
SPP-110/4 = 4 ?
SPP-110/8 = 8 ?
General |
|
| Product type | Cone driver |
| Brand | Monacor |
| Reference | SPP-110/8 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 4.5 inch |
| Frequency coverage type | Low, Midbass, Midrange |
| Manufacturer sensitivity | 90 dB |
| Calculated sensitivity | 86.46 dB |
| Nominal power handling | 30 W |
| Max power handling | 60 W |
| Bandwidth | 55÷8000 Hz |
Fundamental parameters |
|
| Sd | 55 cm² |
| Mms | 4.4 gr |
| Cms | 1890 µm/N |
| Le | 0.4 mH |
| Re | 6.5 ohm |
| BL | 4.6 T.m |
Small signal parameters |
|
| Fs | 55 Hz |
| Qes | 0.46 |
| Qms | 2.01 |
| Qts | 0.37 |
| Vas | 8 L |
Datas |
|
| Xmax | ±2 mm |
| EBP | 120 Hz |
| Fs / Qts | 149 Hz |
| Vas * Qts² | 1.1 L |
| Calculated efficiency | 0.28 % |
Dimensions |
|
| Voice coil diameter | 1 inch |
| External dimensions | 110 | 110 mm |
| Baffle cutout diameter | 100 mm |
| Depth | 60 mm |
| Diamètre aimant (mm) | 80 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Acier |
| Voice coil former | Aluminium |
| Surround shape | One roll |
| Surround material | Rubber |
Question about Monacor SPP-110/8-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Monacor SPP-110/8-8, Range, version, replacement...
With Monacor SPP-110/8-8, customers has also bought
Informations Monacor SPP-110/8-8
Haut-parleurs de grave-médium Hi-Fi, 60 WMAX, 30 WRMS, 8 ?
Avec membrane PVC / Carbone
Perçage des pièces polaires
Réponse en fréquence linéaire dans de très petites enceintes
SPP-110/4 = 4 ?
SPP-110/8 = 8 ?
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Avec membrane PVC / Carbone
Perçage des pièces polaires
Réponse en fréquence linéaire dans de très petites enceintes
SPP-110/4 = 4 ?
SPP-110/8 = 8 ?
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Monacor SPP-110/8-8
SPL vs Impedance measure
Dimensions
