Monacor |
SPM-116/8 |
SPM-116/8-8 |
Cone driver |
Sold by piece |
|
Brand Monacor |
Model SPM-116/8 |
TLHP code SPM-116/8-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
This product is in the process of supply to be in stock.
Reserved on order
Next TLHP reception estimated between May 19, 2024 and May 26, 2024
Haut-parleur de grave-médium Hi-Fi, 50 W, 8 ?, membrane papier à revêtement spécifique, suspension caoutchouc
Haut-parleur de grave-médium Hi-Fi, 40 W, 8 ?
Haut-parleur exceptionnel
Membrane papier pauvre en résonance
Suspension caoutchouc stable
Idéal pour une utilisation dans des enceintes large bande
General |
|
Product type | Cone driver |
Brand | Monacor |
Reference | SPM-116/8 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 4.5 inch |
Frequency coverage type | Fullrange |
Manufacturer sensitivity | 87 dB |
Calculated sensitivity | 85.55 dB |
Nominal power handling | 40 W |
Max power handling | 80 W |
Bandwidth | 75÷18000 Hz |
Fundamental parameters |
|
Sd | 57 cm² |
Mms | 3.8 gr |
Cms | 980 µm/N |
Le | 0.4 mH |
Re | 7.2 ohm |
BL | 4.2 T.m |
Small signal parameters |
|
Fs | 75 Hz |
Qes | 0.81 |
Qms | 1.9 |
Qts | 0.57 |
Vas | 4.5 L |
Datas |
|
Xmax | ±1.5 mm |
EBP | 93 Hz |
Fs / Qts | 132 Hz |
Vas * Qts² | 1.47 L |
Calculated efficiency | 0.23 % |
Dimensions |
|
Voice coil diameter | 0.8 inch |
Outside diameter | 115 mm |
Baffle cutout diameter | 94 mm |
Depth | 60 mm |
Front thickness | 7 mm |
Depth after front | 53 mm |
Diamètre aimant (mm) | 70 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Acier |
Voice coil former | Aluminium |
Surround shape | One roll |
Surround material | Rubber |
Dome material | Paper |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.