Speaker Peerless FSL-1520R02-08, 8 ohm, 15.14 inch
|
Peerless |
FSL-1520R02-08 |
Cone driver |
|
|
Brand Peerless |
TLHP code FSL-1520R02-08 |
|
|
Product type Cone driver |
|
|
Unavailable
-
This 15 inch 8 ohm speaker features a FEA optimized ferrite magnet motor, a 2 inch high-temperature voice coil, and a high strength stamped steel frame.
The multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
General |
|
| Product type | Cone driver |
| Brand | Peerless |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 15 inch |
| Frequency coverage type | Sub, Low |
| Manufacturer sensitivity | 95 dB |
| Calculated sensitivity | 95.83 dB |
| Nominal power handling | 200 W |
Fundamental parameters |
|
| Mms | 64.2 gr |
| Le | 0.68 mH |
| Re | 5.46 ohm |
Small signal parameters |
|
| Fs | 42.65 Hz |
| Qes | 0.69 |
| Qms | 6.69 |
| Qts | 0.63 |
| Vas | 222.83 L |
Datas |
|
| Xmax | ±3.3 mm |
| EBP | 62 Hz |
| Fs / Qts | 68 Hz |
| Vas * Qts² | 88.45 L |
| Calculated efficiency | 2.41 % |
| Weight | ~4.9 kg |
Dimensions |
|
| Voice coil diameter | 2 inch |
| Outside diameter | 384.5 mm |
| Baffle cutout diameter | 347 mm |
| Front thickness | 7.3 mm |
| Depth after front | 154 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Peerless FSL-1520R02-08
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Peerless FSL-1520R02-08
This 15 inch 8 ohm speaker features a FEA optimized ferrite magnet motor, a 2 inch high-temperature voice coil, and a high strength stamped steel frame.
The multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
The multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Peerless FSL-1520R02-08
SPL vs Impedance measure
Dimensions
