Peerless |
XXLS-P835037 |
XXLS-P835037-4 |
Cone driver |
|
Brand Peerless |
Model XXLS-P835037 |
TLHP code XXLS-P835037-4 |
|
Product type Cone driver |
|
This member of the XXLS product family has all the design features suitable for a high performance, high excursion subwoofer driver. The motor features a double ferrite magnet motor, supporting high excursion, and aluminium shorting rings and pole extenders, lowering and linearizing the inductance of
the overhung voice coil. The light & stiff composite paper cone is vented under the dust cap, to reduce air compression. The suspension system features a low-creep rubber surround, and a nomex spider, ensuring long-term reliability under high power conditions. The product also features a rigid cast aluminium basket.
General |
|
Product type | Cone driver |
Brand | Peerless |
Reference | XXLS-P835037 |
Informations |
|
Nominal impedance | 4 ohm |
Dimensional category | 10.5 inch |
Frequency coverage type | Sub |
Manufacturer sensitivity | 86.5 dB |
Calculated sensitivity | 86.41 dB |
Nominal power handling | 120 W |
Fundamental parameters |
|
Sd | 346.4 cm² |
Mms | 93.8 gr |
Cms | 337.9 µm/N |
Le | 0.5 mH |
Re | 2.71 ohm |
BL | 10.07 T.m |
Small signal parameters |
|
Fs | 28.27 Hz |
Qes | 0.45 |
Qms | 9.83 |
Qts | 0.43 |
Vas | 56.93 L |
Datas |
|
Xmax | ±12.3 mm |
EBP | 63 Hz |
Zmin | 3.57 ohm |
Fs / Qts | 66 Hz |
Vas * Qts² | 10.53 L |
Calculated efficiency | 0.28 % |
Weight | ~6.9 kg |
Dimensions |
|
Voice coil diameter | 2 inch |
Gap height | 8 mm |
Outside diameter | 269.2 mm |
Baffle cutout diameter | 239 mm |
Front thickness | 17.2 mm |
Depth after front | 135.1 mm |
Diamètre aimant (mm) | 147 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Aluminium |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
|