Peerless |
XLS-P830452 |
XLS-P830452-4 |
Cone driver |
|
Brand Peerless |
Model XLS-P830452 |
TLHP code XLS-P830452-4 |
|
Product type Cone driver |
|
This 10 inch 4 ohm member of the XLS product family has all the design features suitable for a high performance subwoofer driver. The motor features a double ferrite magnet motor, supporting high excursion, and aluminium shorting rings and pole extenders, lowering and linearizing the inductance of the overhung voice coil. The nomex cone is vented under the dust cap, to reduce air compression. The suspension system features a low-creep rubber surround, and a nomex spider, ensuring long-term reliability under high power conditions. The product also features a rigid cast aluminium basket.
General |
|
Product type | Cone driver |
Brand | Peerless |
Reference | XLS-P830452 |
Informations |
|
Nominal impedance | 4 ohm |
Dimensional category | 10.5 inch |
Frequency coverage type | Sub |
Manufacturer sensitivity | 85.9 dB |
Calculated sensitivity | 86.41 dB |
Nominal power handling | 75 W |
Fundamental parameters |
|
Sd | 349.7 cm² |
Mms | 143.1 gr |
Cms | 346.6 µm/N |
Le | 0.97 mH |
Re | 3.5 ohm |
BL | 17.34 T.m |
Small signal parameters |
|
Fs | 22.6 Hz |
Qes | 0.24 |
Qms | 3.67 |
Qts | 0.22 |
Vas | 59.52 L |
Datas |
|
Xmax | ±12.5 mm |
EBP | 94 Hz |
Zmin | 5.38 ohm |
Fs / Qts | 103 Hz |
Vas * Qts² | 2.89 L |
Calculated efficiency | 0.28 % |
Weight | ~5.9 kg |
Dimensions |
|
Voice coil diameter | 2 inch |
Gap height | 8 mm |
Outside diameter | 269.2 mm |
Baffle cutout diameter | 239 mm |
Front thickness | 17.2 mm |
Depth after front | 117.1 mm |
Diamètre aimant (mm) | 147 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Aluminium |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
|