Visaton |
MR 130 - 8 OHM |
MR 130-8 |
9016 |
Cone driver |
Sold by piece |
|
Brand Visaton |
Model MR 130 - 8 OHM |
TLHP code MR 130-8 |
Manufacturer code 9016 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 3 weeks130 mm (5") cone midrange driver for the midrange band between 1000 and 5000 Hz. Due to the enclosed rear no separate midrange housing construction is necessary. Very good price/performance ratio.
General |
|
Product type | Cone driver |
Brand | Visaton |
Reference | MR 130 - 8 OHM |
Product code | 9016 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 5.5 inch |
Frequency coverage type | Fullrange |
Manufacturer sensitivity | 89 dB |
Calculated sensitivity | 85.14 dB |
Nominal power handling | 80 W |
Max power handling | 100 W |
Bandwidth | 400÷13000 Hz |
Recommended min cutoff frequency | 800 Hz |
Fundamental parameters |
|
Sd | 70 cm² |
Mms | 5 gr |
Le | 0.4 mH |
Re | 6.8 ohm |
BL | 4.3 T.m |
Small signal parameters |
|
Fs | 500 Hz |
Qes | 5.85 |
Qms | 8.67 |
Qts | 3.49 |
Vas | 0.1 L |
Datas |
|
Flux density | 0.9 T |
Xmax | ±2 mm |
Calculated Xmax | ±3.3333 mm |
EBP | 85 Hz |
Fs / Qts | 143 Hz |
Vas * Qts² | 1.22 L |
Calculated efficiency | 0.21 % |
Weight | ~0.55 kg |
Closed speaker | Yes |
Dimensions |
|
Voice coil diameter | 0.98 inch |
Winding depth | 8 mm |
Gap height | 4 mm |
Outside diameter | 141 mm |
Baffle cutout diameter | 110 mm |
Front thickness | 7.2 mm |
Depth after front | 42 mm |
Diamètre aimant (mm) | 70 mm |
Shape & Materials |
|
Magnet type | Ferrite |
Basket masterial | Acier |
Surround material | Foam |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.