SEAS |
U16RCY/P |
U16RCY/P-8 |
H1520-08 |
Cone driver |
Sold by piece |
|
Brand SEAS |
Model U16RCY/P |
TLHP code U16RCY/P-8 |
Manufacturer code H1520-08 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 5 weeks
New Curv cone, a woven polypropylene with excellent internal damping together with perfectly matched moving parts gives a smooth, extended frequency response.
A unique radial reinforced low loss rubber surround reduces radial resonances and prevents surround break up at large excursions.
Bullet shaped phase plug reduces compression due to temperature variations in the voice coil, avoids resonance problems which would occur in the volume between the dust cap and the pole piece and increases the long term power handling capacity.
Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment.
Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum. This driver uses Seas SpiderRing® technology.
General |
|
Product type | Cone driver |
Brand | SEAS |
Reference | U16RCY/P |
Product code | H1520-08 |
Informations |
|
Product manufacturer range | 16 cm, Prestige, Woofer |
Nominal impedance | 8 ohm |
Dimensional category | 6 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 87 dB |
Calculated sensitivity | 86.72 dB |
Nominal power handling | 60 W |
Max power handling | 250 W |
Bandwidth | 45÷30000 Hz |
Fundamental parameters |
|
Sd | 99 cm² |
Mms | 10.26 gr |
Cms | 1900 µm/N |
Rms | 1.11 kg/s |
Le | 0.81 mH |
Re | 6.2 ohm |
BL | 6.3 T.m |
Small signal parameters |
|
Fs | 36 Hz |
Qes | 0.38 |
Qms | 2.19 |
Qts | 0.32 |
Vas | 25 L |
Datas |
|
Flux density | 1.1 T |
Xmax | ±4 mm |
Calculated Xmax | ±6 mm |
Xvar, Xmech, Xlim | ±10 mm |
EBP | 95 Hz |
Fs / Qts | 113 Hz |
Vas * Qts² | 2.56 L |
Calculated efficiency | 0.3 % |
Weight | ~1.3 kg |
Dimensions |
|
Voice coil diameter | 1.02 inch |
Winding depth | 14 mm |
Gap height | 6 mm |
Outside diameter | 146 mm |
Baffle cutout diameter | 126 mm |
Depth | 70.5 mm |
Front thickness | 5 mm |
Depth after front | 65.5 mm |
Diamètre aimant (mm) | 90 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Acier |
Surround shape | One roll |
Surround material | Rubber |
Cone material | Polypropylen |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
* The frequency responses above show measured free field sound pressure in 0
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.