Eighteen Sound |
ND1460A |
ND1460A-16 |
DRV141460AP16NA - 0422A6M600 |
Compression driver |
Sold by piece |
|
Brand Eighteen Sound |
Model ND1460A |
TLHP code ND1460A-16 |
Manufacturer code DRV141460AP16NA - 0422A6M600 |
||
Product type Compression driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 11 weeks
The ND1460A 1.4 inch exit neodymium HF compression driver has been designed for high level sound systems application.
The diaphragm assembly is composed by an aluminum dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value at 800Hz. The composite diaphragm assembly is made by an aluminum dome strongly joined to the PEN suspension, in order to assure unmatched transient response. The lower density of the aluminum and PEN structure permits higher levels of sensitivity, especially in the mid-high frequency range.
A bended former edge-wound aluminum 75mm voice coil completes the diaphragm assembly. The proprietary treated Nomex former material shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, Nomex is suitable to work also in higher moisture contents environments. The bended former is jointed in a sandwich configuration between PEN suspension and the aluminum dome, assuring extended frequency energy transfer for improved response linearity and unparallel reliability.
Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 19 KGauss in the gap in a compact and lightweight structure. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts were designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures.
The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover that allows to obtain a lower power compression value.
The ability to perform properly under inclement weather conditions is a key-point of Eighteen Sound philosophy. The special coating applied to the magnet and the top and back plates of the magnetic structure makes the ND1460A compression driver resistant to the corrosive effects of salts and oxidization.
110 dB 1W/1m average sensitivity
1.4 inch exit throat
3 inch edgewound aluminum voice coil
160W program power handling
Aluminum PEN diaphragm
High grade neodymium magnetic structure
Excellent thermal exchange
General |
|
Product type | Compression driver |
Brand | Eighteen Sound |
Reference | ND1460A |
Product code | DRV141460AP16NA - 0422A6M600 |
Informations |
|
Nominal impedance | 16 ohm |
Dimensional category | 5 inch |
Manufacturer sensitivity | 110 dB |
Nominal power handling | 80 W |
Max power handling | 160 W |
Bandwidth | 500÷20000 Hz |
Recommended min cutoff frequency | 800 Hz |
Exit dimension | 1.4 inch |
Datas |
|
Flux density | 1.9 T |
Zmin | 10 ohm |
Dimensions |
|
Voice coil diameter | 3 inch |
Outside diameter | 132 mm |
Depth | 62 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
|
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.