Eighteen Sound |
10MB600 |
10MB600-8 |
ALT100600WF08FA |
Cone driver |
Sold by piece |
|
Brand Eighteen Sound |
Model 10MB600 |
TLHP code 10MB600-8 |
Manufacturer code ALT100600WF08FA |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 11 weeks
The 10MB600 mid-bass transducer represents a development of the 10M600 midrange, combining excellent linearity with high efficiency and high power handling capabilities. The 10MB600 is primarily intended for use as a midbass driver in extremely compact 2-way reflex enclosures between 10 and 40 lt.
Its curvilinear paper cone is formed using a special high strength wood pulp, designed to achieve the best possible rigidity and stiffness. An exclusive treatment is also applied to the cone to increase its water repellent properties.
The 75 mm state-of-the-art voice coil is similar to those fitted to our top-of-the-range 18" and 15" models but it is wound with aluminum wire.
The coil also employs our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil, resulting in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
The voice coil cooling is achieved using airways between the chassis back plate and the face plate of the magnet which allow heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. This technology is a result of 3D CAD resource application by our engineers.
The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap also using our in-house FEA CAD facility.
In addition, a special treatment is applied to the top and back plates making the transducer far more resistant to the corrosive effects of salts and oxidization. Hence, the equipment is able to perform outdoors in inclement weather conditions.
98 dB SPL 1W / 1m average sensitivity
75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
450 W AES power handling
Weather protected cone and plates for outdoor usage
Excellent transient response
Improved heat dissipation via unique basket design
Ideal for compact two way and multiway systems
General |
|
Product type | Cone driver |
Brand | Eighteen Sound |
Reference | 10MB600 |
Product code | ALT100600WF08FA |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 10.5 inch |
Frequency coverage type | Low, Midbass, Midrange |
Manufacturer sensitivity | 98 dB |
Calculated sensitivity | 96.37 dB |
Nominal power handling | 450 W |
Max power handling | 700 W |
Bandwidth | 55÷4500 Hz |
Fundamental parameters |
|
Sd | 350 cm² |
Mms | 38 gr |
Cms | 201 µm/N |
Le | 1.6 mH |
Re | 5.7 ohm |
BL | 18.6 T.m |
Small signal parameters |
|
Fs | 58 Hz |
Qes | 0.23 |
Qms | 5.5 |
Qts | 0.22 |
Vas | 33.4 L |
Datas |
|
Xmax | ±6.5 mm |
EBP | 252 Hz |
Fs / Qts | 264 Hz |
Vas * Qts² | 1.62 L |
Calculated efficiency | 2.73 % |
Weight | ~7.2 kg |
Dimensions |
|
Voice coil diameter | 3 inch |
Outside diameter | 260 mm |
Baffle cutout diameter | 232 mm |
Depth | 127 mm |
Front thickness | 14 mm |
Depth after front | 113 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.