Eighteen Sound |
10NMB420 |
10NMB420-8 |
ALT100420WF08NA - 022108N400 |
Cone driver |
Sold by piece |
|
Brand Eighteen Sound |
Model 10NMB420 |
TLHP code 10NMB420-8 |
Manufacturer code ALT100420WF08NA - 022108N400 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 11 weeks
The 10NMB420 neodymium transducer has been developed in response to a specific market requirement for a 10" midbass driver that combines excellent linearity with good efficiency and high power handling capabilities.
The 10NMB420 is primarily intended for use as a midbass driver in line-arrays as well as high quality 2-way or multiway reflex enclosures. The low pass filter might be positioned as high as 2000Hz. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio.
The 65mm Ø state-of-the-art, aluminum wire voice coil employs Interleaved Sandwich Voice coil (ISV) technology. It is composed by a high strength fiberglas former used to carry windings on both the outer and inner surfaces, in order to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high BL force factor.
The voice coil is cooled through airways placed between the chassis back plate and the magnet faceplate. In this way heated air is channeled away from the voice coil and the gap. Another technology present into the 10NMB420 is the SDR (Single Demodulating Ring), used to reproduce instantaneous peak on mid frequencies, reducing intermodulation distortion.
Thanks to the increasing use during outdoor audio events, the ability to perform in humid environments is an extra key feature of the 10NMB420. This is achieved trough an exclusively developed cone treatment which renders the cone humidity repellent while does not increasing the total moving speaker mass.
99 dB SPL 1W / 1m average sensitivity
65 mm (2.5 in) Interleaved Sandwich Voice coil (ISV)
350 W AES power handling
External neodymium magnet assembly
Single Demodulating Ring (SDR) for lower distortion
Weather protected cone and plates for outdoor usage
Suitable for line arrays and compact two way systems
General |
|
Product type | Cone driver |
Brand | Eighteen Sound |
Reference | 10NMB420 |
Product code | ALT100420WF08NA - 022108N400 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 10.5 inch |
Frequency coverage type | Low, Midbass, Midrange |
Manufacturer sensitivity | 99 dB |
Calculated sensitivity | 96.16 dB |
Nominal power handling | 350 W |
Max power handling | 500 W |
Bandwidth | 65÷5000 Hz |
Fundamental parameters |
|
Sd | 346 cm² |
Mms | 29.5 gr |
Cms | 277 µm/N |
Le | 0.37 mH |
Re | 5 ohm |
BL | 14.5 T.m |
Small signal parameters |
|
Fs | 56 Hz |
Qes | 0.26 |
Qms | 5 |
Qts | 0.25 |
Vas | 40 L |
Datas |
|
Xmax | ±4 mm |
EBP | 215 Hz |
Zmin | 7 ohm |
Fs / Qts | 224 Hz |
Vas * Qts² | 2.5 L |
Calculated efficiency | 2.6 % |
Weight | ~3 kg |
Dimensions |
|
Voice coil diameter | 2.56 inch |
Outside diameter | 260 mm |
Baffle cutout diameter | 232 mm |
Depth | 122 mm |
Front thickness | 11 mm |
Depth after front | 111 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.