Eighteen Sound |
15LW1401 |
15LW1401-4 |
ALT151401WF04FA - 0221543120 |
Cone driver |
Sold by piece |
|
Brand Eighteen Sound |
Model 15LW1401 |
TLHP code 15LW1401-4 |
Manufacturer code ALT151401WF04FA - 0221543120 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Next TLHP reception estimated between Jul 20, 2024 and Jul 27, 2024
The 15LW1401 is a low frequency loudspeaker which sets a industry standard in 15" (380 mm) high performance transducers.
The transducer has been designed for use as a low bass or sub-woofer component in either a more compact reflex, bandpass or horn loaded configuration. It provides clean, linear, undistorted low frequency reproduction at very high power levels, as part of a high power fullrange system.
The high excursion capabilities of the surround and suspension system, in conjunction with the Eighteen Sound Double Silicon Spider (DSS), enable the 15LW1401 to achieve high levels of linear travel and maintain full control of the moving mass. The carbon fiber reinforced, straight-sided ribbed cone assures smooth response and exceptional strength, with maximum reliability under high mechanical stress.
The 100 mm Ø copper voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil.
The weight of the windings are evenly distributed, providing a uniform motive drive. This, in conjunction with the use of state-of-the-art high temperature resin adhesives, results in an extremely linear motor assembly.
The already low distortion and sound quality of this loudspeaker has been further improved by the Double Demodulation Rings (DDR) designed to dramatically reduce the intermodulation and harmonic distortion whilst improving the transient response.
Excellent heat dissipation has been achieved by incorporating air channels between the basket and the top plate of the magnet. Further ventilation is provided using air vents in the back plate that direct air into the lower part of the voice coil gap.
Maximum flux concentration and force factor is assured by the unique shape and design of the top and back plates, researched and designed using Magnetic Flux FEA CAD resource. The 15LW1401's ability to perform properly under inclement weather conditions has been achieved using an exclusive cone treatment improving pulp strength, which gives water repellent properties to both sides of the cone. In addition, a special treatment has been applied to both the top and back plates that is far more resistant to the corrosive effects of salts and oxidization than any other in use today.
98 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
1000 W AES power handling
Double Silicon Spider (DSS) for improved excursion control and linearity
Double Demodulating Rings (DDR) for lower distortion
Improved heat dissipation via unique basket design
Weather protected cone and plates for outdoor usage
Suitable for low bass or subwoofer applications
General |
|
Product type | Cone driver |
Brand | Eighteen Sound |
Reference | 15LW1401 |
Product code | ALT151401WF04FA - 0221543120 |
Informations |
|
Nominal impedance | 4 ohm |
Dimensional category | 15 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 98 dB |
Calculated sensitivity | 96.3 dB |
Nominal power handling | 1000 W |
Max power handling | 1400 W |
Bandwidth | 40÷2400 Hz |
Fundamental parameters |
|
Sd | 850 cm² |
Mms | 125 gr |
Cms | 135 µm/N |
Le | 1.02 mH |
Re | 3.5 ohm |
BL | 22 T.m |
Small signal parameters |
|
Fs | 39 Hz |
Qes | 0.27 |
Qms | 7.21 |
Qts | 0.26 |
Vas | 127 L |
Datas |
|
Xmax | ±9 mm |
EBP | 144 Hz |
Zmin | 6.7 ohm |
Fs / Qts | 150 Hz |
Vas * Qts² | 8.59 L |
Calculated efficiency | 2.68 % |
Weight | ~12.4 kg |
Dimensions |
|
Voice coil diameter | 4 inch |
Outside diameter | 387 mm |
Baffle cutout diameter | 353 mm |
Depth | 163 mm |
Front thickness | 19 mm |
Depth after front | 144 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.