B&C Speakers |
10CXN64 |
10CXN64-8+8 |
ALT10CXN648 |
Coaxial driver with two entries |
Sold by piece |
|
Brand B&C Speakers |
Model 10CXN64 |
TLHP code 10CXN64-8+8 |
Manufacturer code ALT10CXN648 |
||
Product type Coaxial driver with two entries |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 4 weeks
For high output applications where fidelity at maximum SPL is the primary concern, consider the 10CXN64 with 2.5" LF & HF voice coils. Power handling has increased to 500W, while also improving nearly every other parameter (including Xvar) relative to our established 10" coax models.
500 W continuous program power capacity
70° nominal coverage
70 - 18000 Hz response
97 dB sensitivity
33 mm (1.3") HF unit exit diameter
Single Neodymium magnet assembly
Aluminium demodulating ring allows a very low distortion figure
Continuing our never-ending quest for higher output, we now offer our popular single neodymium magnet coaxials with larger voice coils for increased power handling. A significant increase in magnet mass also improves sensitivity and cone control, while integrating our latest compression driver technologies improves sound quality and durability in the HF as well.
General |
|
Product type | Coaxial driver with two entries |
Brand | B&C Speakers |
Reference | 10CXN64 |
Product code | ALT10CXN648 |
Informations |
|
Nominal impedance | 8+8 ohm |
Dimensional category | 10.5 inch |
Manufacturer sensitivity | 97 | 103 dB |
Calculated sensitivity | 95.25 dB |
Nominal power handling | 250 | 160 W |
Bandwidth | 70÷18000 Hz |
Recommended min cutoff frequency | 1200 Hz |
Exit dimension | 1.3 inch |
Fundamental parameters |
|
Sd | 320 cm² |
Mms | 33.5 gr |
Le | 1.1 mH |
Re | 5.6 ohm |
BL | 15.8 T.m |
Small signal parameters |
|
Fs | 68 Hz |
Qes | 0.33 |
Qms | 5.6 |
Qts | 0.31 |
Vas | 23 L |
Datas |
|
Flux density | 1.1 | 1.75 T |
Xmax | ±5.5 mm |
Calculated Xmax | ±6 mm |
EBP | 206 Hz |
Zmin | 6.7 ohm |
Zmin N°2 | 7 ohm |
Fs / Qts | 219 Hz |
Vas * Qts² | 2.22 L |
Efficiency | 2.2 % |
Calculated efficiency | 2.11 % |
Weight | ~3.2 kg |
Dispersion | 70° x 70° |
Horn technology | Speaker cone |
Dimensions |
|
Voice coil diameter | 2.5 | 2.5 inch |
Winding depth | 15 mm |
Gap height | 9 mm |
Outside diameter | 261 mm |
Baffle cutout diameter | 232 mm |
Front thickness | 13 mm |
Depth after front | 129 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
Basket masterial | Aluminium |
Winding material | Copper |
Voice coil former | Kapton |
Winding material | CCAW (Copper-clad aluminium wire) |
Diaphragm material | Titanium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.