Coaxial compression driver BMS 4595ND, 8+8 ohm, 1.5 inch exit
|
BMS |
4595ND |
4595-8+8 |
BMS-4595-8+8 |
Coaxial compression driver |
Sold by piece |
|
|
Brand BMS |
Model 4595ND |
TLHP code 4595-8+8 |
Manufacturer code BMS-4595-8+8 |
||
|
Product type Coaxial compression driver |
Sales packaging Sold by Piece |
|
|||
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 27 weeks
learn more
-
Extended Bandwidth (300 - 22000 Hz)
Neodymium Magnet Assembly
With two Subsystems in one, each Driver covers a smaller Frequency range for increased Power Handling, high Dynamic and extremely low Distortion
Excellent Phase Coherence
Perfect Time Alignment without Problems of Multi-Source Interference
Ultra light Weight and small Size
The 4595ND is a 1.5" coaxial compression driver delivering a real coherent single point wave front without hot spots with excellent phase coherence and perfect time alignment. The driver is in fact a 2-way system employing two concentric annular ring diaphragms. Each driver covers a smaller frequency range for increased power handling, high dynamic and extremely low distortion.
The larger of the two reproduces middle frequency from 300 Hz upward, crossing over 6,3 kHz to the HF transducer which is capable of reaching 22 kHz. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak. The voice coils may be driven in conjunction with a passive crossover or driven individually from an active crossover. The outer casting features extensive heatsinking ensuring high power handling and low compression.
General |
|
| Product type | Coaxial compression driver |
| Brand | BMS |
| Reference | 4595ND |
| Product code | BMS-4595-8+8 |
Informations |
|
| Nominal impedance | 8+8 ohm |
| Dimensional category | 5 inch |
| Manufacturer sensitivity | 118 dB |
| Nominal power handling | 150 | 80 W |
| Max power handling | 300 | 160 W |
| Bandwidth | 300÷7000 | 6000÷22000 Hz |
| Recommended min cutoff frequency | 300 | 6300 Hz |
| Exit dimension | 1.5 inch |
Datas |
|
| Flux density | 1.95 | 2.2 T |
Dimensions |
|
| Voice coil diameter | 3.5 | 1.75 inch |
| Outside diameter | 132 mm |
| Depth | 94 mm |
| Driver dimensions mouting holes | M6 |
| Driver mounting system | 4 points on diameter 101.6 mm |
Shape & Materials |
|
| Magnet type | Neodymium |
| Winding material | CCAW (Copper-clad aluminium wire) |
| Diaphragm former material | Kapton |
| Diaphragm material | Polyester |
Question about BMS 4595-8+8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
BMS 4595-8+8, Range, version, replacement...
Repair BMS 4595-8+8
Informations BMS 4595-8+8
Neodymium Magnet Assembly
With two Subsystems in one, each Driver covers a smaller Frequency range for increased Power Handling, high Dynamic and extremely low Distortion
Excellent Phase Coherence
Perfect Time Alignment without Problems of Multi-Source Interference
Ultra light Weight and small Size
The 4595ND is a 1.5" coaxial compression driver delivering a real coherent single point wave front without hot spots with excellent phase coherence and perfect time alignment. The driver is in fact a 2-way system employing two concentric annular ring diaphragms. Each driver covers a smaller frequency range for increased power handling, high dynamic and extremely low distortion.
The larger of the two reproduces middle frequency from 300 Hz upward, crossing over 6,3 kHz to the HF transducer which is capable of reaching 22 kHz. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak. The voice coils may be driven in conjunction with a passive crossover or driven individually from an active crossover. The outer casting features extensive heatsinking ensuring high power handling and low compression.
Name Coaxial compression driver BMS 4595ND, 8+8 ohm, 1.5 inch exit
SKU 4595-8+8
Price € 687.17 572.64
Availability In stock
Buy Coaxial compression driver BMS 4595ND, 8+8 ohm, 1.5 inch exit
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
