Monacor |
SPH-210 |
SPH-210-8 |
Cone driver |
Sold by piece |
|
Brand Monacor |
Model SPH-210 |
TLHP code SPH-210-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 4 weeks
Haut-parleur de grave-médium Hi-Fi, 100 WMAX, 50 WRMS, 8 ?
Haut-parleurs Hi-Fi avec membrane polypropylène, décompression et refroidissement par le noyau. Grande diversité d'applications.
Pour tout type d'utilisation en enceintes 2 ou 3 voies.
Comme remplacement pour des modèles d'enceintes plus anciens.
General |
|
Product type | Cone driver |
Brand | Monacor |
Reference | SPH-210 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 8.5 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 90 dB |
Calculated sensitivity | 90.03 dB |
Nominal power handling | 50 W |
Max power handling | 100 W |
Bandwidth | 28÷4000 Hz |
Fundamental parameters |
|
Sd | 210 cm² |
Mms | 24.5 gr |
Cms | 1320 µm/N |
Le | 1 mH |
Re | 6.5 ohm |
BL | 10.3 T.m |
Small signal parameters |
|
Fs | 28 Hz |
Qes | 0.27 |
Qms | 2.14 |
Qts | 0.24 |
Vas | 81 L |
Datas |
|
Xmax | ±3.5 mm |
EBP | 104 Hz |
Fs / Qts | 117 Hz |
Vas * Qts² | 4.67 L |
Calculated efficiency | 0.64 % |
Weight | ~2.5 kg |
Dimensions |
|
Voice coil diameter | 1.4 inch |
Outside diameter | 210 mm |
Baffle cutout diameter | 183 mm |
Depth | 99 mm |
Front thickness | 10 mm |
Depth after front | 89 mm |
Diamètre aimant (mm) | 120 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Aluminium |
Voice coil former | Aluminium |
Surround shape | One roll |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.