Mundorf
€171.30 IT/piece |
![]() |
Mundorf VN300 feron core coil, 3.3mH ±5%, 0.04ohm, 3.00mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-3,3
VN300-3,3
|
Mundorf
€51.30 IT/piece |
![]() |
Mundorf VT140 feron core coil, 1mH ±3%, 0.1ohm, 1.40mm OFC-copper wire, L66xH50xZ54mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT140-1,0
VT140-1,0
|
Mundorf
€22.12 IT/piece |
![]() |
Mundorf VLCU18 paper air copper foil coil, 0.39mH ±2%, 0.28ohm, 11.5x0.07mm OFC-copper wire, Ø45xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,39
VLCU18-0,39
|
Mundorf
€9.00 IT/piece |
![]() |
Mundorf P100 ferrite pipe core coil, 0.33mH ±3%, 0.15ohm, 1.00mm OFC-copper wire, Ø30xH23mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P100-0,33
P100-0,33
|
Mundorf
€33.30 IT/piece |
![]() |
Mundorf BH125 aronit core coil, 6.8mH ±3%, 0.37ohm, 1.25mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-6,8
BH125-6,8
|
Mundorf
€291.30 IT/piece |
![]() |
Mundorf VN300 feron core coil, 10mH ±5%, 0.08ohm, 3.00mm OFC-copper wire, L130xH115xZ97mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€72.76 IT/piece |
![]() |
Mundorf VT140 feron core coil, 2.7mH ±3%, 0.17ohm, 1.40mm OFC-copper wire, L84xH60xZ60mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT140-2,7
VT140-2,7
|
Mundorf
€57.30 IT/piece |
![]() |
Mundorf CFC14 air copper foil coil, 1mH ±2%, 0.26ohm, 28x0.07mm OFC-copper wire, Ø62xH34mm, with backed varnish wire
CFC14-1,00
CFC14-1,00
|