Mundorf
€20.42 IT/piece |
![]() |
Mundorf BL180 air core coil, 0.15mH ±2%, 0.06ohm, 1.80mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
BL180-0,15
BL180-0,15
|
Mundorf
€18.76 IT/piece |
![]() |
Mundorf P50 ferrite pipe core coil, 22mH ±3%, 6.58ohm, 0.50mm OFC-copper wire, Ø40xH23mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. |
Mundorf
€107.03 IT/piece |
![]() |
Mundorf VSCU12 feron core copper foil paper coil, 4.7mH ±3%, 0.15ohm, 1.98mm OFC-copper wire, L130xH61xZ61mm, with vaccum impregnated wire
VSCU12-4,7
VSCU12-4,7
|
Mundorf
€63.30 IT/piece |
![]() |
Mundorf VN140 feron core coil, 2.7mH ±5%, 0.12ohm, 1.40mm OFC-copper wire, L66xH61xZ63mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN140-2,7
VN140-2,7
|
Mundorf
€274.20 IT/piece |
![]() |
Mundorf VL390 air core coil, 0.68mH ±2%, 0.05ohm, 3.90mm OFC-copper wire, L123xH89xZ108mm, with vaccum impregnated wire
VL390-0,68
VL390-0,68
|
Mundorf
€55.57 IT/piece |
![]() |
Mundorf VLCU12 paper air copper foil coil, 0.22mH ±2%, 0.09ohm, 44x0.07mm OFC-copper wire, Ø47xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-0,22
VLCU12-0,22
|
Mundorf
€9.30 IT/piece |
![]() |
Mundorf BH71 ferrite core coil, 1mH ±3%, 0.22ohm, 0.71mm OFC-copper wire, Ø26xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH71-1,0
BH71-1,0
|
Mundorf
€33.00 IT/piece |
![]() |
Mundorf VSCU15 feron core copper foil paper coil, 0.12mH ±3%, 0.03ohm, 1.40mm OFC-copper wire, L84xH23xZ23mm, with vaccum impregnated wire
VSCU15-0,12
VSCU15-0,12
|