Mundorf
€128.48 IT/piece |
![]() |
Mundorf VT236 feron core coil, 2.2mH ±3%, 0.08ohm, 2.36mm OFC-copper wire, L106xH81xZ88mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT236-2,2
VT236-2,2
|
Mundorf
€265.58 IT/piece |
![]() |
Mundorf VT180 feron core coil, 39mH ±3%, 0.63ohm, 1.80mm OFC-copper wire, L130xH100xZ106mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way. |
Mundorf
€154.20 IT/piece |
![]() |
Mundorf CFC12 air copper foil coil, 2.7mH ±2%, 0.32ohm, 44x0.07mm OFC-copper wire, Ø84xH52mm, with backed varnish wire
CFC12-2,70
CFC12-2,70
|
Mundorf
€6.33 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.18mH ±2%, 0.34ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,18
BL71-0,18
|
Mundorf
€162.75 IT/piece |
![]() |
Mundorf VN236 feron core coil, 5.6mH ±5%, 0.08ohm, 2.36mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN236-5,6
VN236-5,6
|
Mundorf
€124.20 IT/piece |
![]() |
Mundorf VN180 feron core coil, 4.7mH ±5%, 0.11ohm, 1.80mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN180-4,7
VN180-4,7
|
Mundorf
€89.85 IT/piece |
![]() |
Mundorf VL236 air core coil, 1mH ±2%, 0.14ohm, 2.36mm OFC-copper wire, Ø70xH59mm, with vaccum impregnated wire
VL236-1,0
VL236-1,0
|
Mundorf
€17.86 IT/piece |
![]() |
Mundorf VLCU18 paper air copper foil coil, 0.18mH ±2%, 0.18ohm, 11.5x0.07mm OFC-copper wire, Ø38xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,18
VLCU18-0,18
|