Mundorf
€124.20 IT/piece |
![]() |
Mundorf VN180 feron core coil, 4.7mH ±5%, 0.11ohm, 1.80mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN180-4,7
VN180-4,7
|
Mundorf
€9.32 IT/piece |
![]() |
Mundorf BL100 air core coil, 0.18mH ±2%, 0.19ohm, 1.00mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-0,18
BL100-0,18
|
Mundorf
€89.85 IT/piece |
![]() |
Mundorf VL236 air core coil, 1mH ±2%, 0.14ohm, 2.36mm OFC-copper wire, Ø70xH59mm, with vaccum impregnated wire
VL236-1,0
VL236-1,0
|
Mundorf
€17.85 IT/piece |
![]() |
Mundorf VLCU18 paper air copper foil coil, 0.18mH ±2%, 0.18ohm, 11.5x0.07mm OFC-copper wire, Ø38xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,18
VLCU18-0,18
|
Mundorf
€20.48 IT/piece |
![]() |
Mundorf BP71 ferrite pipe core coil, 8.2mH ±3%, 1.89ohm, 0.71mm OFC-copper wire, Ø45xH30mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP71-8,2
BP71-8,2
|
Mundorf
€23.85 IT/piece |
![]() |
Mundorf BH125 ferrite core coil, 3.3mH ±3%, 0.22ohm, 1.25mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-3,3
BH125-3,3
|
Mundorf
€188.48 IT/piece |
![]() |
Mundorf VN300 feron core coil, 4.7mH ±5%, 0.05ohm, 3.00mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-4,7
VN300-4,7
|
Mundorf
€53.03 IT/piece |
![]() |
Mundorf VT140 feron core coil, 1.2mH ±3%, 0.11ohm, 1.40mm OFC-copper wire, L66xH50xZ54mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT140-1,2
VT140-1,2
|