Mundorf
|
Mundorf VL236 air core coil, 0.68mH ±2%, 0.11ohm, 2.36mm OFC-copper wire, Ø70xH59mm, with vaccum impregnated wire
VL236-0,68
VL236-0,68
|
Mundorf
Unavailable |
Mundorf BS125 feron core coil, 3.9mH ±3%, 0.25ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 84x32xH32mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
Mundorf BS71 feron core coil, 8.2mH ±3%, 0.99ohm, 0.71mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x27xH27mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
Mundorf BS180 feron core coil, 1mH ±3%, 0.06ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x33xH33mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
Air core coil Mundorf BL100, 2mH ±2%, 0.74ohm, Ø22xL58mm, with backed varnish
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-2,00
BL100-2,00
|
Mundorf
Unavailable |
Air foil coil Mundorf CFC16, 2mH ±2%, 0.55ohm, Ø24xL70mm
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC16-2,00
CFC16-2,00
|
Mundorf
Unavailable |
iCore feron coil Mundorf BS140, 2.2mH ±3%, 0.15ohm, 84x28xH28mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.
BS140-2,20
BS140-2,20
|
Mundorf
Unavailable |
Mundorf BS180 feron core coil, 12mH ±3%, 0.26ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 150x43xH43mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |