Mundorf
Unavailable |
Mundorf BS180 feron core coil, 8.2mH ±3%, 0.21ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 130x39xH39mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
Mundorf BS125 feron core coil, 12mH ±3%, 0.46ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x36xH36mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
|
Mundorf VL236 air core coil, 0.22mH ±2%, 0.06ohm, 2.36mm OFC-copper wire, Ø70xH29mm, with vaccum impregnated wire
VL236-0,22
VL236-0,22
|
Mundorf
Unavailable |
Mundorf BS125 feron core coil, 3mH ±3%, 0.22ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 84x30xH30mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
Mundorf BS71 feron core coil, 5.6mH ±3%, 0.8ohm, 0.71mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x27xH27mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
Pipe core coil Mundorf H71, 2mH ±3%, 0.35ohm, Ø25xL26mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H71-2,00
H71-2,00
|
Mundorf
Unavailable |
Mundorf BS125 feron core coil, 6.8mH ±3%, 0.35ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 96x32xH32mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
Air core coil Mundorf BL140, 2mH ±2%, 0.43ohm, Ø29xL70mm, with backed varnish
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-2,00
BL140-2,00
|