Mundorf
€15.29 IT/piece |
![]() |
Mundorf BL100 air core coil, 0.82mH ±2%, 0.44ohm, 1.00mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-0,82
BL100-0,82
|
Mundorf
€7.77 IT/piece |
![]() |
Mundorf L100 air core coil, 0.22mH ±2%, 0.21ohm, 1.00mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-0,22
L100-0,22
|
Mundorf
€170.70 IT/piece |
![]() |
Mundorf BL180 air core coil, 8.2mH ±2%, 0.72ohm, 1.80mm OFC-copper wire, L105xH79xZ93mm, with backed varnish wire
BL180-8,2
BL180-8,2
|
Mundorf
€364.20 IT/piece |
![]() |
Mundorf VT236 feron core coil, 27mH ±3%, 0.32ohm, 2.36mm OFC-copper wire, L150xH115xZ121mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way. |
Mundorf
€111.30 IT/piece |
![]() |
Mundorf CFC10 air copper foil coil, 0.33mH ±2%, 0.07ohm, 70x0.07mm OFC-copper wire, Ø56xH77mm, with backed varnish wire
CFC10-0,33
CFC10-0,33
|
Mundorf
€137.03 IT/piece |
![]() |
Mundorf VL390 air core coil, 0.22mH ±2%, 0.03ohm, 3.90mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL390-0,22
VL390-0,22
|
Mundorf
€154.20 IT/piece |
![]() |
Mundorf VLCU15 paper air copper foil coil, 8.2mH ±2%, 1.08ohm, 22x0.07mm OFC-copper wire, Ø115xH30mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU15-8,2
VLCU15-8,2
|
Mundorf
€22.20 IT/piece |
![]() |
Mundorf P140 ferrite pipe core coil, 1mH ±3%, 0.18ohm, 1.40mm OFC-copper wire, Ø45xH30mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P140-1,00
P140-1,00
|